Catalytic wet oxidation of phenol with Fe–ZSM-5 catalysts. Issue 5 (6th January 2016)

• Record Type: Journal Article
• Authors: Yan, Ying; Jiang, Songshan; Zhang, Huiping
• Is Part Of: RSC advances. Volume 6:Issue 5(2016)
• Page Start: 3850
• Page End: 3859
• Publication Date: 2016-01-06
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c5ra19832a
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : Systematic study of catalytic wet oxidation of phenol over Fe–ZSM-5 and Fe2 O3 /ZSM-5 catalysts. Abstract : Fe–ZSM-5 and Fe2 O3 /ZSM-5 zeolite catalysts were prepared and tested for catalytic wet oxidation of phenol. First, Fe–ZSM-5 and Fe2 O3 /ZSM-5 zeolite catalysts were prepared by the hydrothermal synthetic and incipient wetness impregnation method and characterized to determine the framework and extra-framework Fe 3+ species. Second, the catalytic properties of Fe–ZSM-5 in the oxidation of phenol were systematically studied to determine the optimum technological parameters by investigating the effects of reaction temperature, pH, catalyst concentration and stirring rate on the conversion of phenol. In addition to the phenol conversion, selectivity to CO2 and concentration of aromatic intermediates in the oxidation of phenol with the two catalysts were analyzed under the same optimum conditions. Leaching of iron from the catalysts, as well as the catalytic stability of Fe–ZSM-5, was also tested. Finally, the kinetics of catalytic wet oxidation of phenol with Fe–ZSM-5 was studied. The experimental results showed that both the framework and extra-framework Fe 3+ species were present in Fe–ZSM-5. The oxidation reaction with Fe–ZSM-5 was performed well at a temperature of 70 °C, pH of 4, catalyst concentration of 2.5 g L −1, stirring rate of 400 rpm and reaction time of 180 min. The conversion of phenol reached 94.1%. From the catalytic results of the two catalysts, it can be concluded that the framework Fe 3+ species may be more efficient in phenol oxidation than the extra-framework Fe 3+ species, the stability of Fe–ZSM-5 was better and a relatively low decrease in activity could be found after three consecutive runs. The activation energy of 27.42 kJ mol −1 was obtained for phenol oxidation with Fe–ZSM-5.