The Effect of Cyclic Loading on the Compressive Strength of Core Build‐Up Materials. Issue 7 (15th January 2015)

• Record Type: Journal Article
• Authors: Zankuli, Muayed A.; Silikas, Nick; Devlin, Hugh
• Is Part Of: Journal of prosthodontics. Volume 24:Issue 7(2015)
• Page Start: 549
• Page End: 552
• Publication Date: 2015-01-15
• Subjects: Prosthodontics -- Periodicals; Dental implants -- Periodicals; Dentistry -- Periodicals; 617.69
• DOI: 10.1111/jopr.12264
• Languages: English
• ISSNs: 1059-941X

Abstract

<abstract abstract-type="main"> <title>Abstract</title> <sec id="jopr12264-sec-0010" sec-type="section"> <title>Purpose</title> <p>To evaluate the effect of cyclic loading on compressive strength of core build‐up materials.</p> </sec> <sec id="jopr12264-sec-0020" sec-type="section"> <title>Materials and Methods</title> <p>Four dual‐cured composites (Core.X Flow, Grandio Core, Bright Flow Core, Spee‐Dee) and one light‐cured reinforced resin‐modified glass ionomer (Fuji II LC) were tested. One hundred cylindrical specimens (4 mm × 6 mm) were prepared. Each material had two groups (ten specimens to be tested under static loading and ten specimens to be tested after cyclic loading). The specimens were stored wet, and after 30 days, one group of each material was cyclically loaded (for 250, 000 cycles with a frequency of 1.6 Hz under stress load of 68.6 N) in a chewing simulator CS–4.2. Then specimens were subjected to static compressive loading until failure in a universal testing machine.</p> </sec> <sec id="jopr12264-sec-0030" sec-type="section"> <title>Results</title> <p>Mean compressive strength values before cycling ranged from 144 MPa (15.8) for Fuji II LC to 277 MPa (23.2) for Grandio Core. Independent <italic>t</italic>‐test showed no statistically significant difference (<italic>p</italic> > 0.05) in the compressive strength of each material before and after cycling (<italic>p</italic> = 0.7 Grandio Core, <italic>p</italic> = 0.3 Core<bold><sup>.</sup></bold>X Flow, <italic>p</italic> = 0.6 Bright Flow Core, <italic>p</italic> = 0.2 Spee‐Dee, <italic>p</italic> = 0.6 Fuji II LC); however, there was a statistically significant difference between the materials when comparing before and after cycling.</p> </sec> <sec id="jopr12264-sec-0040" sec-type="section"> <title>Conclusions</title> <p>All tested materials showed no reduction in the compressive strength after cycling. Therefore, the tested materials can survive 1 year in service without a reduction in compressive strength.</p> </sec> </abstract>