22 μm-pitch 9-bit Column-Parallel Overlapping-Subrange SAR (CPOSSAR) ADC. Issue 9 (September 2015) - Wang, Hongtao
Abstract The Column-Parallel Overlapping-Subrange Successive-Approximation-Register Analog-to-Digital Converter (CPOSSAR ADC) uses a 5-bit split capacitor DAC twice to achieve 9-bit resolution. Its total capacitor area is only 3% of a 9-bit binary weighted DAC and the average switching power is only 12% of a conventional 9-bit DAC. The ADC can perform a 9-bit conversion by first digitizing the 4 most significant bits (MSB) in a coarse conversion stage and then digitizing the 5 least significant bits (LSB) in a fine conversion stage. The accuracy requirement of the DAC is reduced by using overlapping subranges. The proposed ADC achieved an SFDR of 73.6 dB and a SINAD of 55 dB in post-layout simulation, corresponding to an ENOB of 8.8 bits. The design was fabricated in a TSMC׳s 0.35 μm high-voltage process. The use of overlapping subranges reduced the DNL error from +5.14/−1 LSB to +1.27/−0.92 LSB, and improved the INL error from +5.35/−5.34 LSB to +3.17/−3.18 LSB. At a sampling rate of 1.1 MS/s the ADC achieved 41.5 dB SFDR, 34.2 dB SINAD, and consumed 242 μW/channel dynamic power. An individual ADC channel is only 22 μm wide. COPSSAR ADCs are a factor of 4, 2, and 2.5 more area efficient than Multiple-ramp Single-slope ADCs, SAR ADCs, and Cyclic ADCs.