A cantilever beam analogy for quantifying higher mode effects in multistorey buildings. (21st January 2015)

• Record Type: Journal Article
• Authors: Wiebe, Lydell; Christopoulos, Constantin
• Is Part Of: Earthquake engineering and structural dynamics. Volume 44:Number 11(2015:Sep.)
• Page Start: 1697
• Page End: 1716
• Publication Date: 2015-01-21
• Subjects: Structural dynamics -- Periodicals; Earthquake engineering -- Periodicals; 624.1762
• DOI: 10.1002/eqe.2549
• Languages: English
• ISSNs: 0098-8847

Abstract

<abstract abstract-type="main"> <title>Summary</title> <p>This paper examines higher mode effects in systems where the ductile mechanism for seismic design is the base moment‐rotation response. The modal properties of flexural and shear beams with uniform mass and elasticity and with a variable amount of base rotational restraint are derived. As the base fixity is released, the first mode becomes the rigid body rotation of the beam about the base, but the higher modes change much less, particularly for the shear beam model. Most response quantities that are of interest in the seismic design of typical mid‐rise buildings are controlled by the first two lateral modes, except at locations along the height where the second mode contributes little. However, the third and higher lateral modes are more significant for high‐rise buildings.</p> <p>Based on the theory of uniform cantilever shear beams, expressions are developed to avoid the need for a modal analysis to estimate the overturning moment, storey shear, and floor acceleration envelopes. Considering the measured response from the shake table testing of a large‐scale eight‐storey controlled rocking steel braced frame, the proposed expressions are shown to be of similar or better accuracy to a modified modal superposition technique, which combines the higher mode response from an elastic modal analysis with the response associated with achieving the maximum base overturning moment according to an inverted triangular load distribution. Because the proposed method uses only parameters that are available at the initial design stage, avoiding the analysis of a structural model, it is likely to be especially useful for preliminary design. Copyright © 2015 John Wiley & Sons, Ltd.</p> </abstract>