Low thermal conductivity coating system for application up to 1000 °C by simple PDC processing with active and passive fillers. Issue 12 (October 2015)

• Record Type: Journal Article
• Authors: Barroso, Gilvan S.; Krenkel, Walter; Motz, Günter
• Is Part Of: Journal of the European Ceramic Society. Volume 35:Issue 12(2015:Dec.)
• Page Start: 3339
• Page End: 3348
• Publication Date: 2015-10
• Subjects: Ceramic materials -- Periodicals; Composite materials -- Periodicals; Matériaux céramiques -- Périodiques; Composites -- Périodiques; Ceramic materials; Composite materials; Periodicals; Electronic journals; 666.05
• DOI: 10.1016/j.jeurceramsoc.2015.02.006
• Languages: English
• ISSNs: 0955-2219

Abstract

<abstract abstract-type="author" id="abs0005"> <title id="sect0005">Abstract</title> <sec> <p id="spar0005">In this work, the development of a novel thermal barrier coating system based on polymer-derived ceramics, applied by simple lacquer methods is reported. The system consists of a polysilazane (PHPS) bond-coat and an insulating layer formed by the combination of passive (YSZ) and active (ZrSi₂) fillers with a (organo)silazane (Durazane 1800). The aim of this study is to investigate the influence of type and amount of the different fillers on the coating formation and properties, as well as to obtain high thickness, strong adhesion and low thermal conductivity. The resulting coatings and their components were investigated by TGA, XRD, SEM, and EDX. The adhesion was analyzed by cross-cut tape test and by pull-off test. The thermal conductivity was measured by 3<italic>ω</italic>-method. The best coating system presents thermal stability up to 1000 °C, thickness of 50 μm, pull-off adhesion of 10 MPa and outstanding low thermal conductivity of 0.44 W (m K)⁻¹.</p> </sec> </abstract>