Consistency Between Treponema pallidum Particle Agglutination Assay and Architect Chemiluminescent Microparticle Immunoassay and Characterization of Inconsistent Samples. Issue 4 (19th May 2014)
- Record Type:
- Journal Article
- Title:
- Consistency Between Treponema pallidum Particle Agglutination Assay and Architect Chemiluminescent Microparticle Immunoassay and Characterization of Inconsistent Samples. Issue 4 (19th May 2014)
- Main Title:
- Consistency Between Treponema pallidum Particle Agglutination Assay and Architect Chemiluminescent Microparticle Immunoassay and Characterization of Inconsistent Samples
- Authors:
- Zhiyan, Li
Meiling, Wang
Ping, Liu
Jinhua, Dong
Zhenlin, Yan
Zhenru, Feng - Abstract:
- <abstract abstract-type="main"> <title> <x xml:space="preserve">Abstract</x> </title> <sec id="jcla21765-sec-0010" sec-type="section"> <title>Background</title> <p> <italic>Treponema pallidum</italic> particle agglutination assay (TPPA) has been shown to be highly sensitive and specific at detecting treponemal antibodies and is still used as a confirmatory method in many laboratories, in China. In clinical practice, we found that a significant number of TPPA‐negative sera were identified when TPPA was used as a confirmatory assay of Architect chemiluminescent microparticle immunoassay (CMIA) screening‐reactive sera.</p> </sec> <sec id="jcla21765-sec-0020" sec-type="section"> <title>Aims</title> <p>To investigate the consistency between Architect CMIA and TPPA, and analyzed the characterization of TPPA‐negative sera following Screening by Architect CMIA.</p> </sec> <sec id="jcla21765-sec-0030" sec-type="section"> <title>Methods</title> <p>According to the laboratory syphilis confirmatory testing protocol, a total of 4870 sera were initially tested by Architect CMIA and ELISA, and then the samples which shown positive results were tested by TPPA and rapid plasma reagin tests (RPR). Further analysis using Euroimmun dot‐immunoblot (dot‐IBT) assay was performed to the CMIA positive and TPPA negative samples.</p> </sec> <sec id="jcla21765-sec-0040" sec-type="section"> <title>Results</title> <p>In our cohort, we found that the positive rate of CMIA was 3.1% (149/4870). One hundred<abstract abstract-type="main"> <title> <x xml:space="preserve">Abstract</x> </title> <sec id="jcla21765-sec-0010" sec-type="section"> <title>Background</title> <p> <italic>Treponema pallidum</italic> particle agglutination assay (TPPA) has been shown to be highly sensitive and specific at detecting treponemal antibodies and is still used as a confirmatory method in many laboratories, in China. In clinical practice, we found that a significant number of TPPA‐negative sera were identified when TPPA was used as a confirmatory assay of Architect chemiluminescent microparticle immunoassay (CMIA) screening‐reactive sera.</p> </sec> <sec id="jcla21765-sec-0020" sec-type="section"> <title>Aims</title> <p>To investigate the consistency between Architect CMIA and TPPA, and analyzed the characterization of TPPA‐negative sera following Screening by Architect CMIA.</p> </sec> <sec id="jcla21765-sec-0030" sec-type="section"> <title>Methods</title> <p>According to the laboratory syphilis confirmatory testing protocol, a total of 4870 sera were initially tested by Architect CMIA and ELISA, and then the samples which shown positive results were tested by TPPA and rapid plasma reagin tests (RPR). Further analysis using Euroimmun dot‐immunoblot (dot‐IBT) assay was performed to the CMIA positive and TPPA negative samples.</p> </sec> <sec id="jcla21765-sec-0040" sec-type="section"> <title>Results</title> <p>In our cohort, we found that the positive rate of CMIA was 3.1% (149/4870). One hundred and twelve of 112 (75.2%) CMIA‐positive sera were TPPA reactive, while 37 (24.8%) sera which were reactive in CMIA were nonreactive by TPPA. Dot‐IBT testing was performed on these 37 sera: 8 (21.6%) were dot‐IBT positive, 11 (29.7%) were indeterminate and 18 (48.6%) negative.</p> </sec> <sec id="jcla21765-sec-0050" sec-type="section"> <title>Discussion</title> <p>In this study, we observed that 18 CMIA‐positive sera were false positives confirmed by dot‐IBT. But, given the relatively high levels of early syphilis, we consider a small increase in the number of confirmatory tests is worthwhile if we can increase the detection of primary syphilis by 20%. We also found that significant numbers (8/37) of CMIA‐positive and TPPA‐negative sera were shown by further dot‐IBT testing to be positive. The reason why certain sera are negative by TPPA but reactive by CMIA and other syphilis confirmatory assays is not clear, and these initial findings should be further explored.</p> </sec> <sec id="jcla21765-sec-0060" sec-type="section"> <title>Conclusion</title> <p>The Architect CMIA is a highly sensitive screening assay for detecting syphilis but it is significantly less specific. Further analysis by TPPA is recommended to confirm the results. We would highlight the fact that in repeatedly screened populations discrepancies between treponemal CMIA and TPPA results are quite prevalent. This seems to be a function of very low levels of syphilis‐specific antibodies. Confirmation by immunoblot assay may be useful.</p> </sec> </abstract> … (more)
- Is Part Of:
- Journal of clinical laboratory analysis. Volume 29:Issue 4(2015)
- Journal:
- Journal of clinical laboratory analysis
- Issue:
- Volume 29:Issue 4(2015)
- Issue Display:
- Volume 29, Issue 4 (2015)
- Year:
- 2015
- Volume:
- 29
- Issue:
- 4
- Issue Sort Value:
- 2015-0029-0004-0000
- Page Start:
- 281
- Page End:
- 284
- Publication Date:
- 2014-05-19
- Subjects:
- Diagnosis, Laboratory -- Periodicals
Medical laboratory technology -- Periodicals
616 - Journal URLs:
- http://onlinelibrary.wiley.com/ ↗
- DOI:
- 10.1002/jcla.21765 ↗
- Languages:
- English
- ISSNs:
- 0887-8013
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 4958.520000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 4126.xml