Fabrication and mechanical characterization of long and different penetrating length neural microelectrode arrays. (May 2015)

• Record Type: Journal Article
• Authors: Goncalves, S B; Peixoto, A C; Silva, A F; Correia, J H
• Is Part Of: Journal of micromechanics and microengineering. Volume 25:Number 5(2015:May)
• Page Start: 229
• Page End: 257
• Publication Date: 2015-05
• Subjects: Microelectromechanical systems -- Periodicals; Micromechanics -- Periodicals; 621.38105
• DOI: 10.1088/0960-1317/25/5/055014
• Languages: English
• ISSNs: 0960-1317

Abstract

<abstract> <title>Abstract</title> <p>This paper presents a detailed description of the design, fabrication and mechanical characterization of 3D microelectrode arrays (MEA) that comprise high aspect-ratio shafts and different penetrating lengths of electrodes (from 3 mm to 4 mm). The array's design relies only on a bulk silicon substrate dicing saw technology. The encapsulation process is accomplished by a medical epoxy resin and platinum is used as the transduction layer between the probe and neural tissue. The probe's mechanical behaviour can significantly affect the neural tissue during implantation time. Thus, we measured the MEA maximum insertion force in an agar gel phantom and a porcine cadaver brain. Successful 3D MEA were produced with shafts of 3 mm, 3.5 mm and 4 mm in length. At a speed of 180 mm min⁻¹, the MEA show maximum penetrating forces per electrode of 2.65 mN and 12.5 mN for agar and brain tissue, respectively. A simple and reproducible fabrication method was demonstrated, capable of producing longer penetrating shafts than previously reported arrays using the same fabrication technology. Furthermore, shafts with sharp tips were achieved in the fabrication process simply by using a V-shaped blade.</p> </abstract>