Improvement in physical and electrical properties of poly(vinyl alcohol) hydrogel conductive polymer composites. Issue 28 (1st April 2015)

• Record Type: Journal Article
• Authors: Phuchaduek, Winatthakan; Jamnongkan, Tongsai; Rattanasak, Ubolluk; Boonsang, Siridech; Kaewpirom, Supranee
• Is Part Of: Journal of applied polymer science. Volume 132:Issue 28(2015)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2015-04-01
• Subjects: Polymers -- Periodicals; Polymerization -- Periodicals; 668.9
• DOI: 10.1002/app.42234
• Languages: English
• ISSNs: 0021-8995

Abstract

<abstract abstract-type="main"> <title>ABSTRACT</title> <p>With an aim to develop anti‐electrostatic discharge materials based on biodegradable polymers, poly(vinyl alcohol) films composited with two different conductive fillers (carbon black and aluminium) at various fillers contents (20−60%wt), were manufactured using solvent‐casting technique. The mechanical properties of such the films were investigated through tensile stress‐strain tests. Wettability and morphology of the composite films were performed by water contact angle measurement and SEM, respectively. Young's modulus of the composite films can be increased with the addition of conductive fillers. The surface of the composite films showed non‐homogeneous appearance, in which the phase boundary within the composites was clearly observed and the conductive fillers formed aggregation structure at high filler concentration. In addition, the composite films exhibited better hydrophobicity when higher conductive filler content was added. TGA results suggested that both carbon black and aluminum have proven their efficiency to enhance thermal stability of poly(vinyl alcohol). Investigation of cross‐cut adhesion performance of the prepared composite films revealed that carbon black‐filled composites exhibited excellent adhesion strength. The effect of conductive filler content on surface resistivity of the composite films was also examined. The experimental results confirmed that both the fillers used in this study can improve the electrical conductivity of poly(vinyl alcohol) hydrogel. The surface resistivity of the composite films was reduced by several orders of magnitude when the filler of its critical concentration was applied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. <bold>2015</bold>, <italic>132</italic>, 42234.</p> </abstract>