Sr2Fe1.5Mo0.5O6–δ – Zr0.84Y0.16O2–δ Materials as Oxygen Electrodes for Solid Oxide Electrolysis Cells. Issue 6 (28th October 2014)

• Record Type: Journal Article
• Authors: Li, J.; Zhong, C.; Meng, X.; Wu, H.; Nie, H.; Zhan, Z.; Wang, S.
• Is Part Of: Fuel cells. Volume 14:Issue 6(2014:Dec.)
• Page Start: 1046
• Page End: 1049
• Publication Date: 2014-10-28
• Subjects: Fuel cells -- Periodicals; 621.312429
• DOI: 10.1002/fuce.201400021
• Languages: English
• ISSNs: 1615-6846

Abstract

<abstract abstract-type="main" xml:lang="en"> <title>Abstract</title> <p>The high‐temperature solid oxide electrolysis cell (SOEC) is one of the most promising devices for hydrogen mass production. To make SOEC suitable from an economical point of view, each component of the SOEC has to be optimized. At this level, the optimization of the oxygen electrode is of particular interest since it contributes to a large extent to the cell polarization resistance. The present paper is focused on an alternative oxygen electrode of Zr_0.84Y_0.16O_2–<italic>_δ</italic>‐Sr₂Fe_1.5Mo_0.5O_6–<italic>_δ</italic> (YSZ‐SFM). YSZ‐SFM composite oxygen electrodes were fabricated by impregnating the YSZ matrix with SFM, and the ion‐impregnated YSZ‐SFM composite oxygen electrodes showed excellent performance. For a voltage of 1.2 V, the electrolysis current was 223 mA cm⁻², 327 mA cm⁻² and 310 mA cm⁻² at 750 °C for the YSZ‐SFM10, YSZ‐SFM20, and YSZ‐SFM30 oxygen electrode, respectively. A hydrogen production rate as high as 11.46 NL h⁻¹ has been achieved for the SOEC with the YSZ‐SFM20 electrode at 750 °C. The results demonstrate that YSZ‐SFM fabricated by impregnating the YSZ matrix with SFM is a promising composite electrode for the SOEC.</p> </abstract>