Electrophoretic Deposition of Zirconia Thin Film on Nonconducting Substrate for Solid Oxide Fuel Cell Application. Issue 11 (1st August 2014)

• Record Type: Journal Article
• Authors: Das, Debasish; Basu, Rajendra N.; Sprenkle, Vincent
• Is Part Of: Journal of the American Ceramic Society. Volume 97:Issue 11(2014)
• Page Start: 3452
• Page End: 3457
• Publication Date: 2014-08-01
• Subjects: Ceramics -- Periodicals; 620.1405
• DOI: 10.1111/jace.13163
• Languages: English
• ISSNs: 0002-7820

Abstract

<abstract abstract-type="main" id="jace13163-abs-0001"> <title> <x xml:space="preserve">Abstract</x> </title> <p>Electrophoretic deposition (EPD) of 8 mol% yttria‐stabilized zirconia (YSZ) electrolyte thin film has been carried out onto nonconducting porous NiO‐YSZ cermet anode substrate using a fugitive and electrically conducting polymer interlayer for solid oxide fuel cell (SOFC) application. Such polymer interlayer burnt out during the high‐temperature sintering process (1400°C for 6 h) leaving behind a well adhered, dense, and uniform ceramic YSZ electrolyte film on the top of the porous anode substrate. The EPD kinetics have been studied in depth. It is found that homogeneous and uniform film could be obtained onto the polymer‐coated substrate at an applied voltage of 15 V for 1 min. After the half‐cell (anode + electrolyte) is co‐fired at 1400°C, a suitable cathode composition (La_0.65Sr_0.3MnO₃) thick film paste is screen printed on the top of the sintered YSZ electrolyte. A second stage of sintering of such cathode thick film at 1100°C for 2 h finally yield a single cell SOFC. Such single cell produced a power output of 0.91 W/cm² at 0.7 V when measured at 800°C using hydrogen and oxygen as fuel and oxidant, respectively.</p> </abstract>