Fabrication and properties of poly(l‐lactide) nanofibers via blend sea‐island melt spinning. Issue 1 (23rd July 2014)

• Record Type: Journal Article
• Authors: Zhang, Xiuqin; Jin, Gaoling; Ma, Wenjuan; Meng, Lingyan; Yin, Huihui; Zhu, Zhiguo; Dong, Zhenfeng; Wang, Rui
• Is Part Of: Journal of applied polymer science. Volume 132:Issue 1(2015:Jan. 05)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2014-07-23
• Subjects: Polymers -- Periodicals; Polymerization -- Periodicals; 668.9
• DOI: 10.1002/app.41228
• Languages: English
• ISSNs: 0021-8995

Abstract

<abstract abstract-type="main"> <title>ABSTRACT</title> <p>Poly(<sc>l</sc>‐lactide) (PLLA) nanofibers were prepared by melt extrusion of immiscible blends of PLLA/low density polyethylene (LDPE) and subsequent removal of the LDPE matrix from the blend fibers. The effect of blends composition and draw ratio on the phase structure of the blend fibers, crystallization, mechanical properties, and the diameter of the PLLA nanofibers was investigated. It is found that the diameter of the PLLA phase gradually increases with the increase of PLLA content. With the variation of PLLA content from 50 to 60 wt %, the average diameter of acquired PLLA nanofibers changes from 119 to 153 nm under the draw ratio of 1.5. When further increasing the content of PLLA to 65%, it is difficult to acquire PLLA nanofibers due to the poor dissolving properties between PLLA and LDPE components. Oriented PLLA nanofibers with the average diameter of 92 nm can be fabricated from PLLA/LDPE (50/50, wt %) blends under the draw ratio of 2. The present results suggest that it is possible to acquire polymer nanofibers with high output using blend sea‐island melt spinning. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. <bold>2015</bold>, <italic>132</italic>, 41228.</p> </abstract>