Influence of metal‐oxide‐supported bentonites on the pyrolysis behavior of polypropylene and high‐density polyethylene. Issue 1 (25th July 2014)

• Record Type: Journal Article
• Authors: Ahmad, Imtiaz; Khan, Mohammad Ismail; Khan, Hizbullah; Ishaq, Mohammad; Tariq, Razia; Gul, Kashif; Ahmad, Waqas
• Is Part Of: Journal of applied polymer science. Volume 132:Issue 1(2015:Jan. 05)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2014-07-25
• Subjects: Polymers -- Periodicals; Polymerization -- Periodicals; 668.9
• DOI: 10.1002/app.41221
• Languages: English
• ISSNs: 0021-8995

Abstract

<abstract abstract-type="main"> <title>ABSTRACT</title> <p>In this article, we report on the pyrolysis of polypropylene (PP) and high‐density polyethylene (HDPE) in the absence and presence of plain and metal‐oxide‐impregnated bentonite clays [BCs; acid‐washed bentonite clay (AWBC), Zn/AWBC, Ni/AWBC, Co/AWBC, Fe/AWBC, and Mn/AWBC] into useful products. Thermal and catalytic runs were performed at 300°C in the case of PP and at 350°C in the case of HDPE for a contact time of 30 min. The effects of different catalysts and their concentrations on the overall yields and the yields of liquid, gas, and residue were studied. The efficacy of each catalyst is reported on the basis of the highest liquid yields (in weight percentage). The derived liquid products were analyzed by Fourier transform infrared spectroscopy and gas chromatography–mass spectroscopy; this confirmed the presence of paraffins, olefins, and naphthenes. The results indicate the catalytic role of impregnated BCs compared to plain BC with the optimum efficiency shown by Co/AWBC in the case of PP and Zn/AWBC in the case of HDPE toward the formation of liquid products in a desirable C range with the enrichment of olefins and naphthenes in the case of PP and paraffins and olefins in the case of HDPE compared to the thermal run. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. <bold>2015</bold>, <italic>132</italic>, 41221.</p> </abstract>