Evolution of slip surface roughness through shear. Issue 5 (10th March 2014) - Davidesko, Guy
Abstract A significant part of displacement in fault zones occurs along discrete shear surfaces. The evolution of fault surface topography is studied here in direct shear laboratory experiments. Matching tensile fracture surfaces were sheared under imposed constant normal stress and sliding velocity. The roughness evolution was analyzed using measurements of surface topography before and after slip. We show that shearing reduces the initial surface roughness at all measurement scales. At all wavelengths, the roughness ratio between initial and final roughness increases as a function of the slip distance. For a given test, the roughness ratio increases with wavelength up to a few millimeters, beyond which the ratio becomes wavelength independent. At this region the roughness measured after slip follows a power law similar to that of the initial tensile fracture surface. We interpret this geometrical evolution as a consequence of the deformation stage of interlocked asperities which is followed by shear‐induced dilation.