Flow adjustment at the leading edge of a submerged aquatic canopy. Issue 9 (10th September 2013)

• Record Type: Journal Article
• Authors: Chen, Zhengbing; Jiang, Chunbo; Nepf, Heidi
• Is Part Of: Water resources research. Volume 49:Issue 9(2013:Sep.)
• Page Start: 5537
• Page End: 5551
• Publication Date: 2013-09-10
• Subjects: Hydrology -- Periodicals; 333.91
• DOI: 10.1002/wrcr.20403
• Languages: English
• ISSNs: 0043-1397

Abstract

<abstract abstract-type="main"> <title> <x xml:space="preserve">Abstract</x> </title> <p>[1] This paper describes the transition from open channel flow to flow over submerged vegetation using velocity measurements collected with acoustic Doppler velocimetry (ADV) and particle‐image velocimetry (PIV). Submerged canopies were constructed from arrays of rigid circular cylinders of height <italic>h</italic> in water of depth <italic>H</italic>. Both the canopy density, described by the frontal area per volume (<italic>a</italic>), and degree of submergence (<italic>H</italic>/<italic>h</italic>) were varied. Flow adjustment occurs in three stages. First, velocity begins to decelerate upstream of the canopy, due to a high‐pressure region generated at the canopy leading edge, and continues to decelerate within the canopy, due to canopy drag. Rapid flow deceleration within the canopy creates strong vertical flux out through the top of the canopy that extends over a length proportional to the canopy drag length scale, (<italic>C<sub>D</sub>a</italic>)<sup>−1</sup>, with <italic>C<sub>D</sub></italic> being the canopy drag coefficient. Second, a mixing layer develops at the canopy interface, with the stress at the top of the canopy initially increasing, but eventually reaching a constant value. At this point, the flow within the canopy is fully developed. The length scale for mixing‐layer development is related to canopy drag (<italic>C<sub>D</sub>a</italic>) and the depth ratio (<italic>H</italic>/<italic>h</italic>). In the third stage, the boundary layer above the mixing layer adjusts to the channel boundary conditions. A model is developed to predict the adjustment of vertically averaged velocity within the canopy. Measurements confirm that the flow adjustment is not dependent on canopy length.</p> </abstract>