Improvement of toughness and strength of thick structural steel weld by friction stir welding conditions. (1st May 2013)

• Record Type: Journal Article
• Authors: Morisada, Y; Fujii, H; Nishimoto, R; Miyazawa, T; Iwamoto, Y; Ueji, R
• Is Part Of: Science and technology of welding & joining. Volume 18:Number 4(2013:May)
• Page Start: 287
• Page End: 292
• Publication Date: 2013-05-01
• Subjects: Welding -- Periodicals; Joints (Engineering) -- Periodicals; Surfaces (Technology) -- Periodicals; 671.52
• DOI: 10.1179/1362171812Y.0000000105
• Languages: English
• ISSNs: 1743-2936

Abstract

<abstract> <title> <x xml:space="preserve">Abstract</x> </title> <p>Structural steel plates with tensile strength of 490 MPa and 6 mm in thickness were successfully joined with microstructural control by single sided one-pass butt friction stir welding (FSW). The microstructure in the stir zone (SZ) could be changed to bainite, bainite with proeutectoid ferrite, and fine equiaxed ferrite based on the welding temperature. The bainite increased the hardness and tensile strength, and the ferrite gave the joint similar mechanical properties similar to the base metal. The welding temperature was controlled between below <italic>Ac</italic>₁ and above <italic>Ac</italic>₃ by the rotating rate of the tool and tool materials; i.e. Ir-Re alloy and sintered c-BN with W-Re.</p> </abstract>