Hierarchical crystalline structures and dynamic mechanical properties of injection‐molded bars of HDPE: attributes of temperature field1. (7th March 2013)

• Record Type: Journal Article
• Authors: Wang, Long; Yang, Ming‐Bo; Zhang, Quan‐Ping; Zhang, Rui‐Yan; Wu, Jing‐Jing; Feng, Jian‐Ming
• Is Part Of: Polymers for advanced technologies. Volume 24:Number 6(2013:Jun.)
• Page Start: 541
• Page End: 550
• Publication Date: 2013-03-07
• Subjects: Polymers -- Periodicals; 668.9
• DOI: 10.1002/pat.3114
• Languages: English
• ISSNs: 1042-7147

Abstract

<abstract abstract-type="main"> <title> <x xml:space="preserve">Abstract</x> </title> <p>The relationship among the processing parameters, crystalline morphologies and mechanical properties of injected‐molded bar becomes much complicated primarily due to the existence of temperature gradient coupled with the shear gradient along the sample thickness. The effect of thermal gradient field on the microstructural evolution, hierarchical structures and dynamic mechanical properties of high‐density polyethylene parts molded via gas‐assisted injection molding (GAIM) were investigated using scanning electron microscope, differential scanning calorimetry, dynamic mechanical analysis and two‐dimensional wide‐angle X‐ray diffraction. The three‐dimensional temperature profiles during the cooling stage under different melt temperatures of GAIM process were obtained by using a transient heat transfer model of the enthalpy transformation approach, and the phase‐change plateaus were clearly observed in the cooling curves. It was found that a variety of melt temperatures could induce considerable variations of the hierarchical structures, orientation behavior and dynamic mechanical properties of the injection‐molded bars. With reduced melt temperature, GAIM samples with higher molecular orientation and improved dynamic mechanical properties were obtained. Copyright © 2013 John Wiley &amp; Sons, Ltd.</p> </abstract>