Fundamentals of laser powder bed fusion of metals. (2021)

• Record Type: Book
• Further Information: Note: Edited by Igor Yadroitsev, Ina Yadroitsava, Anton du Plessis, Eric MacDonald.
• Editors: Yadroitsev, Igor; Yadroitsava, Ina; du Plessis, Anton; MacDonald, Eric
• Contents: 1. Historical background Joseph J. Beaman, University of Texas, Austin, Texas, USA 2. Basics of laser powder bed fusion Igor Yadroitsev and Ina Yadroitsava, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa ; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa 3. A step-by-step guide to the L-PBF process Igor Yadroitsev and Ina Yadroitsava, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa ; 4. Physics and modeling Andrey V. Gusarov, Moscow State University of Technology STANKIN, Moscow, Russia 5. Design principles Martin Leary, David Downing, and Bill Lozanovski, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia; Jonathan Harris, nTopology, New York, New York, USA 6. Porosity in laser powder bed fusion Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa 7. Surface roughness Martin Leary, Avik Sarker, Johnathan Tran, Kate Fox, and David Downing, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia; Mahyar Khorasani, School of Engineering, Deakin University, Waurn Ponds, Victoria, Australia; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa 8. Microstructure of L-PBF alloys Pavel Krakhmalev, Department of Engineering and Physics, Karlstad University, Karlstad, Sweden; Nataliya Kazantseva, Institute of Metal Physics UB RAS, Ekaterinburg, Russia 9. Residual stress in laser powder bed fusion Lameck Mugwagwa, Ina Yadroitsava and Igor Yadroitsev, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa ; Nkutwane Washington Makoana, Council for Scientific and Industrial Research, National Laser Centre, Pretoria, South Africa 10. Non-destructive testing of parts produced by laser powder bed fusion Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa; Eric MacDonald, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas, USA; Jess M. Waller, NASA-Johnson Space Center White Sands Test Facility, Las Cruces, New Mexico, USA; Filippo Berto, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway 11. Process monitoring of laser powder bed fusion Marco Grasso and Bianca Maria Colosimo, Department of Mechanical Engineering, Polytechnic University of Milan, Milan, Italy; Kevin Slattery, The Barnes Global Advisors, Pittsburgh, Pennsylvania, USA; Eric MacDonald, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas, USA 12. Post-processing Sara Bagherifard and Mario Guagliano, Department of Mechanical Engineering, Polytechnic University of Milan, Milan, Italy 13. Structural integrity I: static mechanical properties Pavel Krakhmalev, Department of Engineering and Physics, Karlstad University, Karlstad, Sweden; Anna Martin Vilardell and Naoki Takata, Department of Materials Process Engineering, Graduate School of Engineering, Nagoya University, Nagoya, Aich, Japan 14. Structural integrity II: fatigue properties Uwe Zerbst and Mauro Madia, Federal Institute for Materials Research and Testing (BAM), Berlin, Germany 15. Structural integrity III: energy-based fatigue prediction for complex parts Seyed Mohammad Javad Razavi and Filippo Berto, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway; Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa 16. Lattice structures made by laser powder bed fusion Mohammad J. Mirzaali, Jie Zhou, and Amir A. Zadpoor, Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Delft, the Netherlands; Abolfazl Azarniya, Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore; Saeed Sovizi, Independent Researcher, Tehran, Iran 17. Bio-inspired design Yash Mistry, Daniel Anderson, and Dhruv Bhate, 3DX Research Group, The Polytechnic School, Arizona State University, Mesa, Arizona, USA 18. Powder characterization — methods, standards, and state of the art Robert Groarke, School of Mechanical Engineering, Dublin City University, Dublin, Ireland; R. K. Vijayaraghavan, School of Electronic Engineering, Dublin City University, Dublin, Ireland; Daniel Powell, Centre for Defense Engineering, Cranfield University, Shrivenham, United Kingdom; Allan Rennie, Engineering Department, Lancaster University, Lancaster, United Kingdom; Dermot Brabazon, I-Form, Advanced Manufacturing Research Centre, Dublin City University, Dublin, Ireland 19. New materials development Bonnie Attard, Abd El-Moez A. Mohamed, and Moataz M. Attallah, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom 20. Recent progress on global standardization Johannes Gumpinger, ESA/ESTEC, European Space Research and Technology Center, Noordwijk, the Netherlands; Mohsen Seifi, ASTM International, Washington, District of Columbia, USA; Nima Shamsaei, National Center for Additive Manufacturing Excellence (NCAME), Auburn University, Auburn, Alabama, USA; Christian Seidel, Munich University of Applied Sciences, Munich, Germany; Richard W. Russell, NASA Engineering and Safety Center (NESC), Langley Research Center, Hampton, Virginia, USA 21. Industrial applications Elena Lopez, Frank Brueckner, and Samira Gruber, Fraunhofer IWS, Dresden, Germany 22. Economic feasibility and cost-benefit analysis Martin Leary, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia 23. Current state and future trends in laser powder bed fusion technology Andrey Molotnikov, Alex Kingsbury, and Milan Brandt, Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia 24. Case study Anton Du Plessis, Research Group 3D Innovation, Stellenbosch University, Stellenbosch, Western Cape, South Africa; Igor Yadroitsev and Ina Yadroitsava, Department of Mechanical and Mechatronic Engineering, Central University of Technology, Bloemfontein, Free State, South Africa; Johan Els, Centre of Rapid Prototyping and Manufacturing, Central University of Technology, Bloemfontein, Free State, South Africa; Eric MacDonald, W. M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, Texas, USA Please visit the book's companion site for additional information: https://www.elsevier.com/books-and-journals/book-companion/9780128240908 (hyperlink available in the Resources box)
• Publisher Details: Amsterdam : Elsevier
• Publication Date: 2021
• Extent: 1 online resource, illustrations (black and white, and colour)
• Subjects: 671.37; Powder metallurgy -- Industrial applications; Lasers -- Industrial applications
• Languages: English
• ISBNs: 9780128240915
• Related ISBNs: 9780128240908
• Notes: Note: Description based on CIP data; resource not viewed.
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.