Two-phase heat transfer. (2021)
- Record Type:
- Book
- Title:
- Two-phase heat transfer. (2021)
- Main Title:
- Two-phase heat transfer
- Further Information:
- Note: Mizra Mohammad Shah.
- Authors:
- Shah, Mizra Mohammad, 1941-
- Contents:
- Preface Chapter 1 INTRODUCTION 1.1 SCOPE AND OBJECTIVE OF THE BOOK 1.2 BASIC DEFINITIONS: Mass flux, heat flux, mass quality, void fraction, liquid holdup, etc. 1.3 VARIOUS MODELS 1.3.1 Homogeneous Model 1.3.2 Separated Flow Models 1.3.3 Two Fluid Model 1.4 CLASSIFICATION OF CHANNELS 1.4.1 Classifications Based on Physical Dimensions 1.4.2 Classifications Based on Condensation Studies 1.4.3 Classifications Based on Boiling Flow Studies 1.4.4 Classifications Based on Gas-Liquid Flows 1.4.5 Discussion 1.4.6 Recommendation 1.5 FLOW PATTERNS IN CHANNELS 1.5.1 Horizontal Channels 1.5.1.1 Description of Flow Patterns 1.5.1.2 Flow Pattern Maps 1.5.2 Vertical Channels 1.5.3 Inclined Channels 1.5.4 Annuli 1.5.5 Minichannels 1.5.6 Horizontal Tube Bundles with Crossflow 1.5.7 Vertical Tube Bundles 1.5.8 Effect of Low Gravity 1.5.9 Recommendations 1.6 HEAT TRANSFER IN SINGLE PHASE FLOW 1.6.1 Flow inside channels 1.6.2 Vertical Tube/Rod Bundles with Axial Flow 1.6.3 Various Geometries 1.6.4 Liquid Metals 1.7 CALCULATION OF PRESSURE DROP 1.7.1 Single-Phase Pressure Drop in Pipes 1.7.2 Two-Phase Pressure Drop in Pipes 1.7.3 Annuli and Vertical Tube Bundles 1.7.4 Horizontal Tube Bundles 1.7.5 Recommendations 1.8 CALCULATION OF VOID FRACTION 1.8.1 Flow inside Pipes 1.8.2 Flow in Tube Bundles 1.8.3 Recommendations 1.9 CFD MODELLING 1.10 GENERAL INFORMATION Chapter 2 Heat Transfer During Condensation 2.1 INTRODUCTION 2.2 CONDENSATION ON FLAT PLATES 2.2.1 Nusselt Equations 2.2.2 ModificationsPreface Chapter 1 INTRODUCTION 1.1 SCOPE AND OBJECTIVE OF THE BOOK 1.2 BASIC DEFINITIONS: Mass flux, heat flux, mass quality, void fraction, liquid holdup, etc. 1.3 VARIOUS MODELS 1.3.1 Homogeneous Model 1.3.2 Separated Flow Models 1.3.3 Two Fluid Model 1.4 CLASSIFICATION OF CHANNELS 1.4.1 Classifications Based on Physical Dimensions 1.4.2 Classifications Based on Condensation Studies 1.4.3 Classifications Based on Boiling Flow Studies 1.4.4 Classifications Based on Gas-Liquid Flows 1.4.5 Discussion 1.4.6 Recommendation 1.5 FLOW PATTERNS IN CHANNELS 1.5.1 Horizontal Channels 1.5.1.1 Description of Flow Patterns 1.5.1.2 Flow Pattern Maps 1.5.2 Vertical Channels 1.5.3 Inclined Channels 1.5.4 Annuli 1.5.5 Minichannels 1.5.6 Horizontal Tube Bundles with Crossflow 1.5.7 Vertical Tube Bundles 1.5.8 Effect of Low Gravity 1.5.9 Recommendations 1.6 HEAT TRANSFER IN SINGLE PHASE FLOW 1.6.1 Flow inside channels 1.6.2 Vertical Tube/Rod Bundles with Axial Flow 1.6.3 Various Geometries 1.6.4 Liquid Metals 1.7 CALCULATION OF PRESSURE DROP 1.7.1 Single-Phase Pressure Drop in Pipes 1.7.2 Two-Phase Pressure Drop in Pipes 1.7.3 Annuli and Vertical Tube Bundles 1.7.4 Horizontal Tube Bundles 1.7.5 Recommendations 1.8 CALCULATION OF VOID FRACTION 1.8.1 Flow inside Pipes 1.8.2 Flow in Tube Bundles 1.8.3 Recommendations 1.9 CFD MODELLING 1.10 GENERAL INFORMATION Chapter 2 Heat Transfer During Condensation 2.1 INTRODUCTION 2.2 CONDENSATION ON FLAT PLATES 2.2.1 Nusselt Equations 2.2.2 Modifications of Nusselt Equations 2.2.3 Condensation with Turbulent Condensate 2.2.4 Condensation on Underside of Plate 2.2.5 Recommendations 2.3 CONDENSATION INSIDE PLAIN CHANNELS 2.3.1 Laminar condensation in vertical tubes 2.3.2 Onset of turbulence 2.3.3 Prediction of heat transfer in turbulent flow 2.3.3.1 Analytical Models 2.3.3.2 CFD Models 2.3.3.2 Empirical Correlations 2.3.3.2.1Correlations for conventional (macro) channels. 2.3.3.2.2 Correlations for minichannels 2.3.3.2.3 Correlations for both mini and macro channels 2.3.3.2.4 Inclined channels 2.3.4 Recommendations 2.4 CONDENSATION OUTSIDE PLAIN TUBES 2.4.1 Single Tubes 2.4.1.1 Stagnant Vapor 2.4.1.2 Moving Vapor 2.4.2 Horizontal Tube Bundles 2.4.2.1 Vapor Entry from Top 2.4.2.2 Vapor Entry from Side 2.4.3 Recommendations 2.5 CONDENSATION WITH ENHANCED TUBES 2.5.1 Condensation on outside surface 2.5.1.1 Single tubes 2.5.1.2 Tube bundles 2.5.3 Condensation inside enhanced tubes 2.5.4 Recommendations 2.6 CONDENSATION OF SUPERHEATED VAPORS 2.6.1 Stagnant vapor on external surfaces 2.6.2 Moving vapor on external surfaces 2.6.3 Forced convection in tubes 2.6.4 Plate type heat exchangers 2.6.5 Recommendations 2.7 MISCELLANEOUS CONDENSATION PROBLEMS 2.7.1 Condensation on stationary vertical cone 2.7.2 Condensation on rotating disc 2.7.3 Condensation on rotating cone 2.7.4 Condensation on rotating tubes 2.7.5 Plate type condensers 2.7.6 Effect of oil in refrigerants 2.7.7 Effect of gravity 2.7.8 Effect of non-condensable gases 2.7.9 Flooding in Upflow 2.7.10 Condensation in Thermosiphons 2.7.11 Condensation in Helical Coils 2.8 CONDENSATION OF VAPOR MIXTURES 2.8.1 Physical phenomena 2.8.2 Prediction methods 2.8.3 Recommendations 2.9 CONDENSATION OF LIQUID METALS 2.9.1 Condensation from stagnant vapor 2.9.2 Interfacial resistance 2.9.2 Condensation from moving vapors 2.9.3 Recommendations 2.10 DROPWISE CONDENSATION 2.10.1 Prediction of mode of condensation 2.10.2 Theories of dropwise condensation 2.10.3 Methods to get dropwise condensation 2.10.4 Some experimental studies 2.10.5 Prediction methods 2.10.6 Recommendations CHAPTER 3 POOL BOILING 3.1 INTRODUCTION 3.2 NUCLEATE BOILING 3.2.1 Mechanisms of Nucleate Boiling 3.2.2 Bubble Nucleation 3.2.2.1 Inception of Boiling 3.2.2.2 Bubble Nucleation Cycle 3.2.2.3 Active Nucleation Site Density 3.2.2.4 Recommendations 3.2.3 Correlations for Heat Transfer 3.2.3.1 Various Correlations 3.2.3.2 Recommendations 3.2.4 Multi-Component Mixtures 3.2.4.1 Physical Phenomena 3.2.4.2 Prediction Methods 3.2.4.3 Recommendations 3.2.5 Liquid metals 3.2.5.1 Physical Phenomena 3.2.5.2 Prediction Methods 3.2.5.3 Recommendations 3.3 CRITICAL HEAT FLUX 3.3.1 Models of Mechanisms 3.3.2 Correlations for Inclined Surfaces 3.3.3 Various Correlations 3.3.4 Effect of Subcooling 3.3.5 Various Other Factors Affecting CHF 3.3.6 Evaluation of CHF Prediction Methods 3.3.7 Recommendations 3.3.8 Mixtures of Fluids 3.3.8.1 Physical Phenomena and Prediction Methods 3.3.8.2 Recommendations 3.3.9 Liquid Metals 3.3.9.1 Physical Phenomena 3.3.9.2 Prediction Methods 3.3.9.3 Recommendations 3.4 TRANSITION BOILING 3.5 MINIMUM FILM BOILING TEMPERATURE 3.5.1 Prediction Methods 3.5.1.1 Analytical Models 3.5.1.2 Empirical Correlations 3.5.2 Recommendations 3.6 FILM BOILING 3.6.1 Methods for Predicting Heat Transfer 3.6.1.1 Vertical Plates 3.6.1.2 Horizontal Cylinders 3.6.1.3 Horizontal Plates 3.6.1.4 Inclined Surfaces 3.6.1.5 Spheres 3.6.2 Liquid Metals 3.6.3 Recommendations 3.7 MISCELLANEOUS TOPICS 3.7.1 Effect of Gravity 3.7.1.1 Scaling Method of Raj et al. 3.7.1.2 Scaling for Hydrogen 3.7.1.3 Some Other Studies 3.7.1.4 Recommendations 3.7.2 Effect of Oil in Refrigerants 3.7.2.1 Mechanisms 3.7.2.2 Correlations 3.7.2.3 Recommendations 3.7.3 Thermosiphons 3.7.4 Effect of Some Organic Additives CHAPTER 4 FORCED CONVECTION SUBCOOLED BOILING 4.1 INTRODUCTION 4.2 INCEPTION OF BOILING IN CHANNEL FLOW 4.2.1 Analytical Models and Correlations 4.2.2 Minichannels 4.2.3 Effect of Dissolved Gases 4.2.3 Recommendations 4.3 PREDICTION OF SUBCOOLED BOILING REGIMES IN CHANNELS 4.3.1 Recommendations 4.4 PREDICTION OF VOID FRACTION IN CHANNELS 4.4.1 Recommendations 4.5 HEAT TRANSFER IN CHANNELS 4.5.1 Visual Observations and Mechanisms 4.5.2 Prediction of Heat Transfer 4.5.2.1 Some Dimensional Correlations 4.5.2.2 The Shah Correlation 4.5.2.3 Various Correlations 4.5.2.4 Recommendations 4.6 SINGLE CYLINDER WITH CROSSFLOW 4.6.1 Experimental Studies 4.6.2 Prediction of Heat Transfer 4.6.3 Recommendation 4.7 MISCELLANEOUS GEOMETRIES 4.7.1 Tube Bundles with Axial Flow 4.7.2 Tube Bundles with Crossflow 4.7.3 Flow Parallel to a Flat Plate 4.7.4 Helical Coils& … (more)
- Edition:
- 1st
- Publisher Details:
- Hoboken : John Wiley & Sons, Inc
- Publication Date:
- 2021
- Extent:
- 1 online resource
- Subjects:
- 536.2
Heat -- Transmission
Two-phase flow - Languages:
- English
- ISBNs:
- 9781119618676
9781119618669 - Related ISBNs:
- 9781119618614
- Notes:
- Note: Description based on CIP data; resource not viewed.
- Access Rights:
- Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
- Access Usage:
- Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library HMNTS - ELD.DS.598797
- Ingest File:
- 04_071.xml