Industrial measurements in machining. (2020)
- Record Type:
- Book
- Title:
- Industrial measurements in machining. (2020)
- Main Title:
- Industrial measurements in machining
- Further Information:
- Note: Grzegorz M. Królczyk, Piotr Niesłony, Jolanta Królczyk, editors.
- Editors:
- Królczyk, Grzegorz M
Niesłony, Piotr
Królczyk, Jolanta - Contents:
- Intro -- Preface -- Contents -- Mathematical Modelling of Core Roughness Depth During Hard Turning -- 1 Introduction -- 2 Rk Parameter and Coefficient KRk -- 3 Experimental Research -- 4 Results and Discussion -- 5 Conclusion -- References -- Unified Mathematic and Geometric Model of Cutting Edge Separation with Corner Radius in Turning -- 1 Introduction -- 2 Analytical Model of Tool Wear -- 3 Geometry of the Tool Workpiece System -- 4 Simplified Case of Tool -- Workpiece System -- 5 Experimental Verification of Model Correctness -- 6 Conclusions -- References Evaluation of Deflection of Thin-Walled Profile During Milling of Hardened Steel -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- Referencing -- The Surface Texture of Ti6Al4V Titanium Alloy Under Wet and Dry Finish Turning Conditions -- 1 Introduction -- 2 Experimental Procedure -- 3 Results -- 4 Conclusions -- References -- Surface Roughness Analysis After Milling Aluminum-Ceramic Composite -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- References -- Technological Aspects of Regeneration of Carbide End Mills 1 Introduction -- 2 Aim, Range and Methodology of Research -- 3 Analysis of Test Results -- 3.1 Geometry of End Mills -- 3.2 Wear of End Mills -- 3.3 Cost of Regeneration -- 4 Summary -- References -- Influence of Milling Parameters on Tribological Properties of Aluminum-Ceramic Composite -- 1 Introduction -- 2 ExperimentalIntro -- Preface -- Contents -- Mathematical Modelling of Core Roughness Depth During Hard Turning -- 1 Introduction -- 2 Rk Parameter and Coefficient KRk -- 3 Experimental Research -- 4 Results and Discussion -- 5 Conclusion -- References -- Unified Mathematic and Geometric Model of Cutting Edge Separation with Corner Radius in Turning -- 1 Introduction -- 2 Analytical Model of Tool Wear -- 3 Geometry of the Tool Workpiece System -- 4 Simplified Case of Tool -- Workpiece System -- 5 Experimental Verification of Model Correctness -- 6 Conclusions -- References Evaluation of Deflection of Thin-Walled Profile During Milling of Hardened Steel -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- Referencing -- The Surface Texture of Ti6Al4V Titanium Alloy Under Wet and Dry Finish Turning Conditions -- 1 Introduction -- 2 Experimental Procedure -- 3 Results -- 4 Conclusions -- References -- Surface Roughness Analysis After Milling Aluminum-Ceramic Composite -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- References -- Technological Aspects of Regeneration of Carbide End Mills 1 Introduction -- 2 Aim, Range and Methodology of Research -- 3 Analysis of Test Results -- 3.1 Geometry of End Mills -- 3.2 Wear of End Mills -- 3.3 Cost of Regeneration -- 4 Summary -- References -- Influence of Milling Parameters on Tribological Properties of Aluminum-Ceramic Composite -- 1 Introduction -- 2 Experimental Details -- 2.1 Research Method -- 2.2 Materials of Tribological Pair -- 2.3 Scope of Tests -- 3 Results and Discussion -- 4 Summary -- References -- Analysis of the Turning Process to Optimize Energy Consumption -- 1 Introduction -- 2 Subject of Study -- 2.1 Research Stand 2.2 Measurement Results -- 3 Summary -- References -- Quality of Gear Wheels in Selected Operations of the Manufacturing Process -- 1 Introduction -- 2 General Characteristics of Analysed Operations in Manufacturing Process of the Investigated Gear Wheels -- 3 Experimental Research -- 4 Discussion of Obtained Results -- 5 Summary -- References -- Analysis of Optimization Effects of Deflection Angle of a Disc-Type Grinding Wheel on Accuracy of Profile Dividing Grinding of Gears -- 1 Introduction -- 2 Characteristic of Workstation with Rapid Höfler 2000 Grinder 3 Profile Dividing Grinding of A Selected Gear Wheels with Consideration of Deflection Angle Optimization of the Grinding Wheel -- 4 Results of Research and Discussion of Results -- 5 Summary -- References -- Evaluation of Geometrical Parameters of a Spur Gear Manufactured in an Incremental Process from GP1 Steel -- 1 Introduction -- 2 Research Methodology and Objectives -- 3 Analysis of Dimension and Shape Accuracy -- 3.1 ATOS II Triple Scan -- Making Measurements and Preparing Analysis -- 3.2 Gear Measurements Using Klingelnberg P40 Together with Analysis -- 4 Conclusions -- References … (more)
- Publisher Details:
- Cham : Springer
- Publication Date:
- 2020
- Extent:
- 1 online resource
- Subjects:
- 671.3/5
Machining -- Measurement -- Congresses
Electronic books
Electronic books - Languages:
- English
- ISBNs:
- 9783030499105
3030499103 - Related ISBNs:
- 303049909X
9783030499099 - Access Rights:
- Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
- Access Usage:
- Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library HMNTS - ELD.DS.518683
- Ingest File:
- 03_106.xml