Testing adhesive joints : best practices /: best practices. (2012)

• Record Type: Book
• Further Information: Note: Edited by Lucas F.M. da Silva ... [et al.].
• Other Names: Silva, Lucas Filipe Martins da, 1973-
• Contents: MANUFACTURE OF QUALITY SPECIMENS; Preparing Bulk Specimens by Hydrostatic Pressure; Preparing Bulk Specimens by Injection; Preparing Bulk Specimens by Pouring; Preparing Lap Joints with Flat Adherends; SimpleMethods for the Preparation of Single Lap Joints Specimens; Preparing Thick Adherend Shear Test Specimens; Modified Thick Adherend Shear Test; Preparing Butt Joints; Preparing Napkin Ring Specimens; Preparing T Joint Specimens; Preparing Flexible-to-Rigid Peel Specimens; Preparing Specimens for Fracture Properties: Double Cantilever Beam and Tapered Double Cantilever Beam; Preparing Bonded Wood Double Cantilever Beam (DCB); Specimens; Modified Arcan Test; ; QUASI-STATIC CONSTITUTIVE AND STRENGTH TESTS; Quasi-Static Testing of Bulk Tensile Specimens; Uniaxial and Bulk Compression; Quasi-Static Testing of Bulk Compression on Flat Specimens; Iosipescu (V-Notched Beam) Test; Arcan (V-Notched Plate) Test; Quasi-Static Testing of Butt Joints in Tension; Shear Properties of Adhesives Measured by Napkin Rings and Solid Butt Joints in Torsion; Quasi-Static Testing of Thick Adherend Shear Test Specimens; Modified Thick Adherend Shear Test; Quasi-Static Testing of Lap Joints; Modified Arcan Test; Pin-and-Collar Test Method; ; QUASI-STATIC FRACTURE TESTS; Measuring Bulk Fracture Toughness; Quasi-Static Fracture Tests: Double Cantilever Beam and Tapered Double Cantilever Beam Testing; End-Notched Flexure; Mode II Fracture Characterization of Bonded Joints Using the ELS Test; The Notched Torsion Test to Determine the Mode III Fracture Properties of Adhesives; Other Mixed Mode Adhesive Fracture Test Specimens; Compact Mixed Mode (CMM) Fracture Test Method; Mixed Mode Bending (MMB) with a Reeder and Crews Fixture; Mixed Mode Fracture Testing; Fracture of Wood Double Cantilever Beam (DCB) Specimens; The T-Peel Test ; Peel Testing at 180?; The Floating Roller Peel Test; Climbing Drum Peel Test; The Analysis of Peel Tests; ; HIGHER RATE AND IMPACT TESTS; Dynamic Elastic Modulus; The Pendulum Impact Test for Adhesives and Adhesive Joints; Higher Rate and Impact Tests: Fracture at High Rates; High-Strain-Rate Testing of Adhesive Specimens and Joints by Hopkinson Bar Technique; Clamped Hopkinson Bar; Testing of Adhesive Bonds under Peel and Shear Loads at Increased Velocities; ; DURABILITY; Measurement of the Diffusion Coefficient; Tests with Moisture; Durability Testing Using Open-Faced Specimens; Tests with Temperature; The Wedge Test; Fatigue; Mixed-Mode Fatigue Testing of Adhesive Joints; Measurement of Time-Dependent Crack Growth; Curvature Mismatch Fracture Test for Subcritical Debonding; ; OTHER TEST METHODS; Thermal Characterization; Dynamic Mechanical Analysis with a Vibrating Beam Method; Bimaterial Curvature Method for Residual Stress and Thermal Expansion Coefficient Determination; The Pull-Off Test; Shaft-Loaded Blister Test; Tests under Hydrostatic Pressure; ; INDEX;
• Publisher Details: Place of publication not identified : Wiley-VCH
• Publication Date: 2012
• Extent: 1 online resource (468 pages)
• Subjects: 668.3; Adhesive joints; Adhesive joints -- Testing
• Languages: English
• ISBNs: 9783527647040
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.