Dynamics and control of robotic systems. (2019)

• Record Type: Book
• Further Information: Note: Andrew J. Kurdila, Pinhas Ben-Tzvi.
• Authors: Kurdila, Andrew; Ben-Tzvi, Pinhas, 1973-
• Contents: Preface xiii Acknowledgment xv About the Companion Website xvii 1 Introduction 1 1.1 Motivation 1 1.2 Origins of Robotic Systems 5 1.3 General Structure of Robotic Systems 7 1.4 Robotic Manipulators 9 1.4.1 Typical Structure of Robotic Manipulators 9 1.4.2 Classification of Robotic Manipulators 11 1.4.2.1 Classification by Motion Characteristics 11 1.4.2.2 Classification by Degrees of Freedom 12 1.4.2.3 Classification by Driver Technology and Drive Power 12 1.4.2.4 Classification by Kinematic Structure 12 1.4.2.5 Classification by Workspace Geometry 14 1.4.3 Examples of Robotic Manipulators 14 1.4.3.1 Cartesian Robotic Manipulator 15 1.4.3.2 Cylindrical Robotic Manipulator 16 1.4.3.3 SCARA Robotic Manipulator 16 1.4.3.4 Spherical Robotic Manipulator 17 1.4.3.5 PUMA Robotic Manipulator 18 1.4.4 Spherical Wrist 18 1.4.5 Articulated Robot 20 1.5 Mobile Robotics 20 1.5.1 Humanoid Robots 20 1.5.2 Autonomous Ground Vehicles 22 1.5.3 Autonomous Air Vehicles 23 1.5.4 Autonomous Marine Vehicles 25 1.6 An Overview of Robotics Dynamics and Control Problems 26 1.6.1 Forward Kinematics 27 1.6.2 Inverse Kinematics 28 1.6.3 Forward Dynamics 28 1.6.4 Inverse Dynamics and Feedback Control 29 1.6.5 Dynamics and Control of Robotic Vehicles 30 1.7 Organization of the Book 31 1.8 Problems for Chapter 1 33 2 Fundamentals of Kinematics 35 2.1 Bases and Coordinate Systems 35 2.1.1 N -Tuples and M × N Arrays 35 2.1.2 Vectors, Bases and Frames 39 2.1.2.1 Vectors 40 2.1.2.2 Bases and Frames 41 2.2 Rotation Matrices 49 2.3 Parameterizations of Rotation Matrices 52 2.3.1 Single Axis Rotations 52 2.3.2 Cascades of Rotation Matrices 56 2.3.2.1 Cascade Rotations about Moving Axes 56 2.3.2.2 Cascade Rotations about Fixed Axes 57 2.3.3 Euler Angles 57 2.3.3.1 The 3-2-1 Yaw-Pitch-Roll Euler Angles 58 2.3.3.2 The 3-1-3 Precession-Nutation-Spin Euler Angles 62 2.3.4 Axis Angle Parameterization 65 2.4 Position, Velocity, and Acceleration 68 2.5 Angular Velocity and Angular Acceleration 77 2.5.1 Angular Velocity 77 2.5.2 Angular Acceleration 83 2.6 Theorems of Kinematics 84 2.6.1 Addition of Angular Velocities 84 2.6.2 Relative Velocity 87 2.6.3 Relative Acceleration 88 2.6.4 Common Coordinate Systems 91 2.6.4.1 Cartesian Coordinates 91 2.6.4.2 Cylindrical Coordinates 92 2.6.4.3 Spherical Coordinates 94 2.7 Problems for Chapter 2, Kinematics 96 2.7.1 Problems on N -tuples and M × N Arrays 96 2.7.2 Problems on Vectors, Bases, and Frames 97 2.7.3 Problems on Rotation Matrices 98 2.7.4 Problems on Position, Velocity, and Acceleration 102 2.7.5 Problems on Angular Velocity 104 2.7.6 Problems on the Theorems of Kinematics 104 2.7.6.1 Problems on the Addition of Angular Velocities 104 2.7.7 Problems on Relative Velocity and Acceleration 105 2.7.8 Problems on Common Coordinate Systems 108 3 Kinematics of Robotic Systems 109 3.1 Homogeneous Transformations and Rigid Motion 109 3.2 Ideal Joints 115 3.2.1 The Prismatic Joint 116 3.2.2 The Revolute Joint 117 3.2.3 Other Ideal Joints 119 3.3 The Denavit–Hartenberg Convention 121 3.3.1 Kinematic Chains and Numbering in the DH Convention 121 3.3.2 Definition of Frames in the DH Convention 123 3.3.3 Homogeneous Transforms in the DH Convention 124 3.3.4 The DH Procedure 127 3.3.5 Angular Velocity and Velocity in the DH Convention 133 3.4 Recursive O (N ) Formulation of Forward Kinematics 138 3.4.1 Recursive Calculation of Velocity and Angular Velocity 140 3.4.2 Efficiency and Computational Cost 143 3.4.3 Recursive Calculation of Acceleration and Angular Acceleration 147 3.5 Inverse Kinematics 160 3.5.1 Solvability 160 3.5.2 Analytical Methods 163 3.5.2.1 Algebraic Methods 163 3.5.2.2 Geometric Methods 174 3.5.3 Optimization Methods 176 3.5.4 Inverse Velocity Kinematics 184 3.5.4.1 Singularity 185 3.6 Problems for Chapter 3, Kinematics of Robotic Systems 186 3.6.1 Problems on Homogeneous Transformations 186 3.6.2 Problems on Ideal Joints and Constraints 188 3.6.3 Problems on the DH Convention 188 3.6.4 Problems on Angular Velocity and Velocity for Kinematic Chains 190 3.6.5 Problems on Inverse Kinematics 195 4 Newton–Euler Formulations 197 4.1 Linear Momentum of Rigid Bodies 197 4.2 Angular Momentum of Rigid Bodies 203 4.2.1 First Principles 203 4.2.2 Angular Momentum and Inertia 208 4.2.3 Calculation of the Inertia Matrix 214 4.2.3.1 The Inertia Rotation Transformation Law 214 4.2.3.2 Principal Axes of Inertia 218 4.2.3.3 The Parallel Axis Theorem 221 4.2.3.4 Symmetry and Inertia 224 4.3 The Newton–Euler Equations 229 4.4 Euler’s Equation for a Rigid Body 233 4.5 Equations of Motion for Mechanical Systems 235 4.5.1 The General Strategy 235 4.5.2 Free Body Diagrams 236 4.6 Structure of Governing Equations: Newton–Euler Formulations 258 4.6.1 Differential Algebraic Equations (DAEs) 258 4.6.2 Ordinary Differential Equations (ODEs) 260 4.7 Recursive Newton–Euler Formulations 262 4.8 Recursive Derivation of the Equations of Motion 271 4.9 Problems for Chapter 4, Newton–Euler Equations 274 4.9.1 Problems on Linear Momentum 274 4.9.2 Problems on the Center of Mass 277 4.9.3 Problems on the Inertia Matrix 279 4.9.4 Problems on Angular Momentum 281 4.9.5 Problems on the Newton–Euler Equations 282 5 Analytical Mechanics 285 5.1 Hamilton’s Principle 285 5.1.1 Generalized Coordinates 285 5.1.2 Functionals and the Calculus of Variations 288 5.1.3 Hamilton’s Principle for Conservative Systems 292 5.1.4 Kinetic Energy for Rigid Bodies 299 5.2 Lagrange’s Equations for Conservative Systems 303 5.3 Hamilton’s Extended Principle 307 5.3.1 Virtual Work Formulations 307 5.4 Lagrange’s Equations for Robotic Systems 322 5.4.1 Natural Systems 322 5.4.2 Lagrange’s Equations and the Denavit–Hartenberg Convention 326 5.5 Constrained Systems 329 5.6 Problems for Chapter 5, Analytical Mechanics 334 5.6.1 Problems on Hamilton’s Principle 334 5.6.2 Problems on Lagrange’s Equations 337 5.6.3 Problems on Hamilton’s Extended Principle 339 5.6.4 Problems on Constrained Systems 345 6 Control of Robotic Systems 347 6.1 The Structure of Control Problems 347 6.1.1 Setpoint and Tracking Feedback Control Problems 348 6.1.2 Open Loop and Closed Loop Control 349 6.1.3 Linear and Nonlinear Control 349 6.2 Fundamentals of Stability Theory 350 6.3 Advanced Techniques of Stability Theory 357 6.4 Lyapunov’s Direct Method 358 6.5 The Invariance Principle 361 6.6 Dynamic Inversion or Computed Torque Control 366 6.7 Approximate Dynamic Inversion and Uncertainty 376 6.8 Controllers Based on Passivity 389 6.9 Actuator Models 393 6.9.1 Electric Motors 393 6.9.2 Linear Actuators 400 6.10 Backstepping Control and Actuator Dyna
• Edition: 1st
• Publisher Details: Hoboken, New Jersey : John Wiley & Sons, Inc
• Publication Date: 2019
• Extent: 1 online resource
• Subjects: 629.892; Robots -- Dynamics; Robots -- Control systems
• Languages: English
• ISBNs: 9781119524953
• Related ISBNs: 9781119524908
• Notes: Note: Description based on CIP data; resource not viewed.
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.