Advances in manufacturing technology : select procedings of ICAMT 2018 /: select procedings of ICAMT 2018. ([2019])

• Record Type: Book
• Other Titles: ICAMT--2018
• Further Information: Note: Somashekhar S. Hiremath, N. Siva Shanmugam and B. R. Ramesh Bapu, editors.
• Editors: Hiremath, Somashekhar S; Shanmugam, N. Siva; Bapu, B. R. Ramesh
• Other Names: International Conference on Advances in Manufacturing Technology
• Contents: Evaluation of Tensile Properties of Nano Clay Filled Madar Fiber Reinforced Polyester Hybrid Composites.- Characterization of Economical Aluminium Mmc Reinforced With Weld Slag Particles.- Optimization of Weld-Bead Parameters Of Plasma Arc Welding Using Ga and Iwo.- Experimental Studies on the Effect of Basalt Powder Inclusion On Mechanical Properties of Hybrid Epoxy And Polyester Composites Reinforced With Glass Fiber.- An Experimental Investigation on Tensile Properties of Hybrid Bio Polyurethane Composite: Modelling and Optimization.- Improvement of Machining Characteristics by Edm with Graphite Powder Mixed Dielectric Medium.- Measuring Industrial Symbiosis Index Using Multi Grade Fuzzy Approach.- Fabrication and Machining Characteristics of Al7075-Red Mud and Al7075-Tic Metal Matrix Composites.- Multi Criteria Optimization of Machining Parameters in Wedm of Titanium Alloy 6242.- Water Absorption & Density Tests on the Water Hyacinth Based Partial Green Composite.- Experimental Analysis on the Mechanical Properties of Dissimilar Material Joint During Pctig Welding.- Influence of Flux Coating During Dissimilar Welding of Copper With Brass Using Atig Welding Process.- Innovative Nitride Film Deposition on Copper Interconnects of Mems Devices Using Plasma Enhanced Chemical Vapour Deposition Techniques.-Sleep Detection and Alert System for Automobiles.- Numerical Analysis and Design Optimization of Lip Seal Opening Pressure for Automotive Valves.- Mechanical and Microstructural Properties of Multi Axially Forged Lm6 Aluminium Alloy.- Implementation of Lean Concepts Using Value Stream Mapping In Automotive Firm.- Fabrication of Automated Scrap Collector Cum Scrubber For Production Industries.- Enhancement of Mechanical Properties Through Spheroidization Annealing For Low Carbon Steel.- Effect of Rolling Reduction on Microstructure and Mechanical Properties Cu-3%Ti Alloy.-An Investigative Approach to Study The Corrosion Response Of Copper-Brass Tig Welded Samples Using Nitric Acid As The Corroding Agent.- A Review On Mechanical Properties, Tribological, Corrosion and Weldability Studies of Aluminum Composites Processed Using Stir Casting & Ecap Methods.- Characterization and Comparison of Functionally Graded Al/Mg and Al/Al 7075 Metal Matrix Composites Manufactured By Die Casting.- Statistical Quality Control of Torque Wrenches Used In Automotive Assembly Department.- Optimal Sequence Identification in Parallel Flow Line Environment Using Heuristics.- Design and Analysis of Stringer on the Chassis Frame in Load Carrying Vehicle.- Design and Analysis of Active Controlled Prosthetic Hand.- Bio-Degradable Composites from Leaf Wastes for Packing Applications.- A Comparative Study of Flow Characteristics of Bmw-M6 and Audi-R8 Commercial Sports Car Using Flow Design Software.- Mechanical Characterization of Glass Fiber Strengthened Balsa-Depron Composite.- Milling Cutter Flank Wear Prediction Using Ensemble of Pso Optimized Svm and Glm Regression Models.- Investigation on the Corrosion Resistance Characteristics of Automobile Lug Nuts.- Application of Taguchi Method in Optimization of Process Parameters of Electrochemical Machining Of Tic Reinforced Aa6063 Composites.- Performance Analysis of Ss304 Steel Hat-Stringer on the Chassis Frame.-Finite Element Modeling Of Single Spark Material Removal and Heat Flux Distribution in Micro Electro Discharge Machining Process.- Electrochemical Micromachining of Aluminium Alloy Composite.- Analysis on Mechanical Behavior of Binary and Hybrid Al 2014 Metal Matrix Composites.- Study of Forces, Surface Finish and Tool Life on Machining Of Inconel 718.-Investigations on Corrosion Behaviour of Aa 8011 –Zrb2 In-Situ Metal Matrix Composites.- Introducing Various Image Processing Techniques to Improve Topology Optimization Process to Develop Compliant Mechanism Based Micro Gripper.- Study on Tensile Strength of Glass Fiber Reinforced Nanocomposites by Vartm.- Investigations on Wire Spark Erosion Machining Of Aluminium Based Metal Matrix Composites.- Optimization of Coefficient Of Friction for Direct Metal Laser Sintered Inconel 718.- Experimental and Numerical Investigation on Incremental Forming of Is513cr3.- Modelling Of Support Vector Mechanism For Green Manufacturability Quantification of Production.- Experimental Study on Surface Roughness and Optimization of Process Parameters Using Ann-Ga in Milling of Super Duplex Stainless Steel Under Dry and Wet Conditions.- Experimental Study On Tool Wear And Optimization of Process Parameters Using Ann-Ga In Turning Of Super Duplex Stainless Steel Under Dry And Wet Conditions.- Multi Response Optimization Using Grey Relation Analysis in Mechanical Micro Drilling (Mmd) Of Titanium – Grade 2 (Cp-Ti G2).- A Glance Through History Of Automobile Industry & Current Market Study Of Some Of The Legendry Models In India.- Effect of Twist Angle and Rpm on the Natural Vibration of Composite Beams Made Up Of Hybrid Laminates.- Tribological Behavior of Az91-Al2o3 Composites by Powder Metallurgy.- Annealing and Zno Doping Effects on Hydrophilicity and Mechanical Strength of Pvdfnanocomposite Thin Films.- Optimization of Transient State Temperature Distribution Analysis on Diffusion Bonded Joints Of Ti-6al-4v with Ss304l Stainless Steel Alloy.- Optimization of Tribological Properties of Al6061/9%Gr/Wc Hybrid Metal Matrix Composites Using Fgra.- Experimental Study on Mechanical Properties of Super Elastic Alloy.- Framework Execution and Schematic of Jounce Bumper in Two Wheeler Fork.- Finite Element Analysis of Bending and Dynamic Response of a Power Transmission Spur Gear.- Design and Analysis of Composite Parabolic Leaf Spring Under Fatigue Load Condition.- Optimizing Headlamp Focusing Through Intelligent System as Safety Assistance in Automobiles.- Modeling and Validation of Ride Characteristics of All Terrain Vehicle (Atv).- Effect of Tool Rotation Speed on Joint Characteristics of Under Water Friction Stir Welded Aa2519-T87 Aluminium Alloy.- Investigation of Hardness and Tribological Behaviour of Aluminum Alloy Lm30 Reinforced With Silicon Carbide, Boron Carbide and Graphite.- Friction and Wear Properties of Bio Based Abrasive in A High Friction Composite Material.- Parametric Optimization of Single Cylinder 4 – Stroke Spark Ignition Engine Crankshaft Using Three Different Materials-Aisi 1040, Aisi 4340, Aisi 4140 and Aisi 4615.- Evaluation and Optimization of Surface Roughness and Metal Removal Rate Through Rsm, Gra, Topsis Techniques In Turning Ptfe Polymers.- Effect of Sintering Temperature on the Microstructure and Forming Behavior of Aa8079 (Al-Cu-Fe-Si-Zn).- Studies of Welding Process Parameters on Clad Bead Shapes and Its Shape Interactions of Ernicrmo - 10 Claddings Deposited by Gmaw.- Review On Corrosion Behavior of Copper-Brass Weldment Samples During Welding With The Different Corrosive Environment.- Effect on Mechanical Properties of Aluminum Composites by Inclusion of Silicon Carbide.
• Publisher Details: Singapore : Springer Nature
• Publication Date: 2019
• Extent: 1 online resource, color illustrations
• Subjects: 670.954; Manufacturing processes -- India -- Congresses; Manufacturing processes -- Congresses; Production engineering -- India -- Congresses; Production engineering -- Congresses; Manufactures -- Technological innovations -- Congresses; TECHNOLOGY & ENGINEERING / Manufacturing; Electronic books; Electronic books
• Languages: English
• ISBNs: 9789811363740; 9811363749
• Related ISBNs: 9789811363733
• Notes: Note: Includes bibliographical references and indexes.; Note: Online resource; title from PDF title page (EBSCO, viewed April 19, 2019).
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.