Physics and engineering of metallic materials : proceedings of Chinese Materials Conference 2018 /: proceedings of Chinese Materials Conference 2018. (2019)
- Record Type:
- Book
- Title:
- Physics and engineering of metallic materials : proceedings of Chinese Materials Conference 2018 /: proceedings of Chinese Materials Conference 2018. (2019)
- Main Title:
- Physics and engineering of metallic materials : proceedings of Chinese Materials Conference 2018
- Further Information:
- Note: Edited by Yafang Han.
- Editors:
- Han, Yafang
- Other Names:
- Chinese Materials Conference
- Contents:
- Intro; Preface; Contents; Contributors; Microstructures and Mechanical Properties of Extruded and Aged Mg-4Zn-2Al-2Sn-(0.6Mn) Alloy; 1 Introduction; 2 Experimental Procedure; 3 Results and Discussion; 3.1 The Microstructures of the ZAT422 and ZATM4220 Alloys; 3.2 The Mechanical Properties of the As-extruded and As-aged ZAT422 and ZATM4220 Alloys; 4 Conclusions; References; Microstructural Evolution of an Al-Zn-Mg-Cu Aluminum Alloy During an Optimized Two-Step Homogenization Treatment; 1 Introduction; 2 Experimental Procedure; 3 Results and Discussion; 4 Conclusions; References Microstructural Evolution and Phase Transformation of Al-Mg-Si Alloy Containing 3% Li During Homogenization1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 As-cast Microstructure; 3.2 DSC Analysis; 3.3 Microstructural Evolution During Homogenization; 4 Conclusions; References; Study on Stabilization Treatment of Al-Mg Alloy 5E83-H112; 1 Introduction; 2 Materials and Methods; 3 Results and Discussion; 3.1 Tensile Properties; 3.2 EBSD Analysis; 3.3 Intergranular Corrosion and Exfoliation Corrosion; 3.4 Stabilization Treatment; 3.5 TEM Microstructure; 4 Conclusions; References 3.4 Mechanical Properties4 Conclusions; References; Effect of Ultrasonic Treatment on Microstructure and Properties of Aluminum Alloy Rod Prepared by Continuous Casting and Rolling; 1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 Microstructure; 3.2 Electrical Conductivity; 3.3 Mechanical Properties; 4Intro; Preface; Contents; Contributors; Microstructures and Mechanical Properties of Extruded and Aged Mg-4Zn-2Al-2Sn-(0.6Mn) Alloy; 1 Introduction; 2 Experimental Procedure; 3 Results and Discussion; 3.1 The Microstructures of the ZAT422 and ZATM4220 Alloys; 3.2 The Mechanical Properties of the As-extruded and As-aged ZAT422 and ZATM4220 Alloys; 4 Conclusions; References; Microstructural Evolution of an Al-Zn-Mg-Cu Aluminum Alloy During an Optimized Two-Step Homogenization Treatment; 1 Introduction; 2 Experimental Procedure; 3 Results and Discussion; 4 Conclusions; References Microstructural Evolution and Phase Transformation of Al-Mg-Si Alloy Containing 3% Li During Homogenization1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 As-cast Microstructure; 3.2 DSC Analysis; 3.3 Microstructural Evolution During Homogenization; 4 Conclusions; References; Study on Stabilization Treatment of Al-Mg Alloy 5E83-H112; 1 Introduction; 2 Materials and Methods; 3 Results and Discussion; 3.1 Tensile Properties; 3.2 EBSD Analysis; 3.3 Intergranular Corrosion and Exfoliation Corrosion; 3.4 Stabilization Treatment; 3.5 TEM Microstructure; 4 Conclusions; References 3.4 Mechanical Properties4 Conclusions; References; Effect of Ultrasonic Treatment on Microstructure and Properties of Aluminum Alloy Rod Prepared by Continuous Casting and Rolling; 1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 Microstructure; 3.2 Electrical Conductivity; 3.3 Mechanical Properties; 4 Conclusions; References; Influence of High-Temperature Compression on Microstructure and Properties of Sintered Molybdenum; 1 Introduction; 2 Experiment; 2.1 Materials; 2.2 Experimental Method; 2.3 Measurements and Characterization; 3 Results and Discussion; 3.1 Density 3.2 Vickers Hardness3.3 Microstructure; 3.4 Textures; 4 Conclusion; References; Microstructure and Mechanical Properties of a Ti-Al-Sn-Zr-Mo-Nb-W-Si High-Temperature Titanium Alloy; 1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 Microstructures After Different Heat Treatments; 3.2 Mechanical Properties After Different Heat Treatment; 4 Conclusions; References; Optimization of Cold-Rolling-Stabilization Process for High Mg-Containing Al Alloy; 1 Introduction; 2 Experimental; 2.1 Material Preparation; 2.2 Characterization; 3 Results and Discussion; 3.1 Microhardness … (more)
- Publisher Details:
- Singapore : Springer
- Publication Date:
- 2019
- Extent:
- 1 online resource
- Subjects:
- 669
Alloys -- Congresses
Metals -- Congresses
Metallurgy -- Congresses
TECHNOLOGY & ENGINEERING / Metallurgy
Alloys
Metallurgy
Metals
Metallic Materials
Magnetism, Magnetic Materials
Manufacturing, Machines, Tools, Processes
Aerospace Technology and Astronautics
Electronic books
Electronic books
Conference papers and proceedings - Languages:
- English
- ISBNs:
- 9789811359446
- Related ISBNs:
- 981135944X
9789811359439 - Notes:
- Note: Online resource; title from PDF title page (SpringerLink, viewed February 19, 2019).
- Access Rights:
- Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
- Access Usage:
- Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library HMNTS - ELD.DS.411322
- Ingest File:
- 02_511.xml