Dynamic isolation technologies in negative pressure isolation wards. ([2017])
- Record Type:
- Book
- Title:
- Dynamic isolation technologies in negative pressure isolation wards. ([2017])
- Main Title:
- Dynamic isolation technologies in negative pressure isolation wards
- Further Information:
- Note: Zhonglin Xu, Bin Zhou.
- Authors:
- Xu, Zhonglin
Zhou, Bin - Contents:
- Preface; Contents; 1 Importance of Negative Pressure Wards; 1.1 The Disaster at the Beginning of the Century; 1.2 Severity of Airborne Infection; 1.3 Requirement for Negative Pressure Ward; References; 2 Three Misunderstandings for Design of Negative Pressure Ward; 2.1 About High Negative Pressure; 2.1.1 Effect of Pressure Difference; 2.1.2 Ability to Control Pollution Dispersion by Pressure Difference; 2.2 About Airproof Gate; 2.2.1 Effect of Entrainment by Door; 2.2.2 Dynamic Characteristic of Door [1]; 2.2.3 Effect of Entrainment by Occupant. 2.2.4 Effect of Temperature Difference Between Indoors and Outdoors2.2.5 Balance Equation of Air Change Rate with Convective Flow by Temperature Difference; 2.2.6 Relationship Between Temperature Difference and Pollutant Exchange Rate; 2.3 About Full Fresh Air; 2.3.1 Outline; 2.3.2 HEPA Filter and Virus Particles; References; 3 Principle and Technology of Dynamic Isolation; 3.1 Proper Pressure Difference for Isolation; 3.1.1 Physical Significance of Pressure Difference; 3.1.2 Determination of Pressure Difference; 3.2 Buffer Room for Isolation; 3.2.1 Mode of Buffer Room. 3.2.2 Isolation Coefficient of Buffer Room3.2.3 Influencing Factors for Performance of Buffer Room; 3.2.4 Experimental Validation; 3.2.5 Door of Buffer Room; 3.3 Airflow Isolation in Mainstream Area; 3.3.1 Concept of Mainstream Area; 3.3.2 Function of Mainstream Area; 3.4 Application of Self-circulation Air Through HEPA Filter; 3.4.1 Application Principle ofPreface; Contents; 1 Importance of Negative Pressure Wards; 1.1 The Disaster at the Beginning of the Century; 1.2 Severity of Airborne Infection; 1.3 Requirement for Negative Pressure Ward; References; 2 Three Misunderstandings for Design of Negative Pressure Ward; 2.1 About High Negative Pressure; 2.1.1 Effect of Pressure Difference; 2.1.2 Ability to Control Pollution Dispersion by Pressure Difference; 2.2 About Airproof Gate; 2.2.1 Effect of Entrainment by Door; 2.2.2 Dynamic Characteristic of Door [1]; 2.2.3 Effect of Entrainment by Occupant. 2.2.4 Effect of Temperature Difference Between Indoors and Outdoors2.2.5 Balance Equation of Air Change Rate with Convective Flow by Temperature Difference; 2.2.6 Relationship Between Temperature Difference and Pollutant Exchange Rate; 2.3 About Full Fresh Air; 2.3.1 Outline; 2.3.2 HEPA Filter and Virus Particles; References; 3 Principle and Technology of Dynamic Isolation; 3.1 Proper Pressure Difference for Isolation; 3.1.1 Physical Significance of Pressure Difference; 3.1.2 Determination of Pressure Difference; 3.2 Buffer Room for Isolation; 3.2.1 Mode of Buffer Room. 3.2.2 Isolation Coefficient of Buffer Room3.2.3 Influencing Factors for Performance of Buffer Room; 3.2.4 Experimental Validation; 3.2.5 Door of Buffer Room; 3.3 Airflow Isolation in Mainstream Area; 3.3.1 Concept of Mainstream Area; 3.3.2 Function of Mainstream Area; 3.4 Application of Self-circulation Air Through HEPA Filter; 3.4.1 Application Principle of Circulation Air; 3.4.2 Function of HEPA Filter; 3.4.3 Experimental Validation for Application of HEPA Filter with Circulation Air; References; 4 Air Distribution Design in Negative Pressure Isolation Ward. 4.1 Fundamental Principle of Air Distribution in Negative Pressure Isolation Ward4.2 Velocity Field Near Return Air Opening; 4.3 Velocity Decay Near Air Supply Outlet; 4.4 The Following Speed and the Deposition Velocity; 4.5 Composition of Velocities and Vortex [9]; 4.6 Position of Air Supply, Exhaust and Return Outlets in Isolation Ward; 4.6.1 Fundamental Principle; 4.6.2 Related Assessment Index; 4.6.3 Results from Numerical Simulation [10, 12]; 4.6.4 Experimental Validation on Performance of Opening Position; References; 5 Calculation of Air Change Rate; 5.1 Outline. 5.2 Two System Modes of Isolation Ward5.2.1 Circulation Air System; 5.2.2 Full Fresh Air System; 5.3 Determination of Bacterial Generation Rate Indoors; 5.3.1 Bacterial Generation Rate from Ordinary Patients; 5.3.2 Analysis of Bacterial Generation Rate from Respiratory System; 5.4 Determination of Bacterial Concentration Standard Indoors; 5.4.1 Outline; 5.4.2 Standard; 5.5 Calculation of Air Change Rate; 5.5.1 Calculation Based on the Minimum Airborne Droplet Nuclei with Diameter 0.075 æm. … (more)
- Publisher Details:
- Singapore : Springer
- Publication Date:
- 2017
- Extent:
- 1 online resource
- Subjects:
- 614.4/6
620
Hospital buildings -- Heating and ventilation
Isolation (Hospital care)
MEDICAL -- Forensic Medicine
MEDICAL -- Preventive Medicine
MEDICAL -- Public Health
Isolation (Hospital care)
Engineering
Building Physics, HVAC
Fluid- and Aerodynamics
Atmospheric Protection/Air Quality Control/Air Pollution
Practice and Hospital Management
Infection Control -- methods
Electronic books - Languages:
- English
- ISBNs:
- 9789811029233
9811029237
9811029229
9789811029226 - Related ISBNs:
- 9789811029226
- Notes:
- Note: Includes bibliographical references.
Note: Online resource; title from PDF title page (SpringerLink, viewed December 28, 2016). - Access Rights:
- Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
- Access Usage:
- Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library HMNTS - ELD.DS.405591
- Ingest File:
- 02_472.xml