Advances and trends in engineering sciences and technologies III : proceedings of the 3rd International Conference on Engineering Sciences and Technologies (ESaT 2018), September 12-14, 2018, High Yatras Mountains, Tatranské Matliare, Slovak Republic /: proceedings of the 3rd International Conference on Engineering Sciences and Technologies (ESaT 2018), September 12-14, 2018, High Yatras Mountains, Tatranské Matliare, Slovak Republic. (2019)

• Record Type: Book
• Further Information: Note: Edited by Mohamad Al Ali, Peter Platko.
• Editors: Ali, Mohamad Al; Platko, Peter
• Other Names: International Conference on Engineering Sciences and Technologies, 3rd
• Contents: Part A Computer simulation and modeling, Mechanics and dynamics, Reliability and durability of structures Behavior of the 2D frames for different approach to soil modeling; V. Akmadzic & A. Vrdoljak The change of the NVH characteristics of composite vehicle components as a result of visible and not visible damages; S.J. Alsarayefi & K. Jalics Long-term bending test of adhesively bonded timber-concrete composite slabs; V. Bajzecerová & J. Kanócz Battened built-up member under compression and bending with one end fixed and the other end free; I.J. Baláž, Y.P. Koleková & L.O. Moroczová Behaviour of steel laced built-up columns; I.J. Baláž, Y.P. Koleková & L.O. Moroczová Piezoresistive behavior of mortars loaded with graphene and carbon fibers for the development of self-sensing composites; A. Belli, A. Mobili, T. Bellezze, F. Tittarelli & P.B. Cachim Bending behavior of steel and GFRP reinforced concrete girders; V. Borzovič, R. Švachula, D. Lániová & S. Šarvaicová FEM modelling of gas pipeline components; J. Brodniansky Jr., J. Brodniansky & M. Magura Slip joint connection of conical towers subjected to bending and torsion; J. Brodniansky Jr., J. Brodniansky, J. Recký, M. Magura, T. Klas & M. Botló Minimum mass container production for ships and airplanes, a review; A.A. Deli, K. Jármai & G. Kovacs Temperature dependence of the yield strength of heat-resistant steels; A. Erdős & K. Jármai Solid glass bricks masonry—material properties of bricks and mortar; J. Fíla, M. Eliášová & Z. Sokol Optimum dynamic analysis of a robot arm using flower pollination algorithm; H.N. Ghafil & K. Jármai Four-point bending tests of double laminated glass panels with PVB interlayer in different loading rates; T. Hána, M. Vokáč, K.V. Machalická, Z. Sokol & M. Eliášová The effect of the subsoil simulation on the punching resistance of footings; J. Hanzel, A. Bartók & J. Halvonik Implementation of the viscous Drucker-Prager and viscous Lee-Fenves nonlinear material models and finite element benchmarks; F. Hokes, J. Kala, M. Trcala & I. Nemec Experimental verification of properties of concrete mixtures for concrete prefabricated elements; M. Janda & M. Zich Minimum mass design of compressed I-section columns with different design rules; K. Jármai & M. Petrik Tensfoamity—a new concept of foam integrated beams; K. Jeleniewicz & W. Gilewski Local buckling of thin-walled steel tubes; R. Kanishchev & V. Kvocak Optimisation while designing portal frames; G. Kászonyi & K. Jármai Methods for determining elastic modulus in natural plant stems; B. Kawecki, J. Podgórski & A. Głowacka On task of thick-walled aluminum pipe deformation under dynamic superplasticity conditions; D.A. Kitaeva, G.E. Kodzhaspirov, Ya.I. Rudaev & Yu.A. Khokhlova Application of laser vibrometry in dam health monitoring; M. Klun, D. Zupan & A. Kryžanowski Assessment of sway buckling influence for laced built-up portal frames; M. Kováč & Zs. Vaník Deformation characteristics of masonry structure subjected to horizontal loads; M. Kozielová & L. Mynarzová Shear resistance of steel and GFRP reinforced beams; D. Lániová & V. Borzovič Evaluation of expressions for calculating the cooling time in carbon steels welding; V. Lazić, D. Arsić, R. Nikolić, Lj. Radović, N. Ilić & B. Hadzima Numerical modeling of load-bearing structures of silos; M. Magura, J. Brodniansky Jr. & J. Brodniansky Detection of concrete thermal load time by acoustic NDT methods; M. Matysík, I. Plšková & Z. Chobola The analysis and effects of flow acoustic in a commercial automotive exhaust system; B. Mohamad & S. Amroune Application of the firefly algorithm for the optimization of cranes; Sz. Nagy & K. Jármai Numerical analysis of soil-slab interaction—influence of the input parameters; Z. Neuwirthova & R. Cajka Verification of the ability of selected acoustic methods to detect the amount of steel fibers in concrete; I. Plšková, L. Topolář, T. Komárková, M. Matysík, Z. Chobola & P. Stoniš Monitoring the shrinkage of concrete slabs reinforced by steel and FRP reinforcement; S. Priganc, D. Kušnírová & Š. Kušnír Influence of fissures in timber on the charring rate; J. Sandanus, Z. Kamenická, P. Rantuch, J. Martinka & K. Balog Study on ligaments’ areas differences between different sizes of modCT concrete specimens; J. Sobek, J. Klon, T. Trčka, H. Cifuentes & J.D. Ríos Determination of basic dynamic characteristics of a tower structure from ambient vibrations; M. Sokol, M. Venglár, K. Lamperová, Z. Šišmišová & R. Ároch Influence of joint stiffness on design of steel members; L. Šabatka, D. Kolaja, M. Vild, F. Wald, M. Kuříková & J. Kabeláč Non-linear analysis of deck slabs subjected to a concentrated load; A. Vidaković, J. Halvonik, R. Vida & T. Augustín An interface damage model in applications with cyclic loading; R. Vodička, K. Krajníková & I. Katreničová Strength parameters of polyester reinforced PVC coated fabric after short term creep loading in biaxial mode; K. Zerdzicki & Y.M. Jacomini Part B Buildings and structures, Construction technology and management, Environmental engineering, Heating, ventilation and air condition, Materials and technologies, Water supply and drainage The use of high voltage discharge in treatment of water saturated with air bubbles; M.Ju. Andrianova, D.A. Korotkov, S.V. Korotkov & G.L. Spichkin The protection of environment during cleaning ETICS with biocides; N. Antošová, B. Belániová, B. Chamulová, K. Janušová & J. Takács The possibility of heating water by photovoltaic panels; R. Baláž Green roofs and their measurement; R. Baláž & S. Tóth Cement screeds—selected methods of humidity measurement; M. Bederka, P. Makýš, M. Ďubek & M. Petro Standards of the universal design to stabilize the housing quality; A. Bílková, P. Kocurová & R. Zdařilová Examination of electricity production loss of a solar panel in case of different types and concentration of dust; I. Bodnár, P. Iski, D. Koós & Á. Skribanek Thermal effects around a heated circular cylinder in horizontal, parallel and contra flow; B. Bolló, P. Bencs & Sz. Szabó Fluorimetric characteristics of river waters compared with pollutant concentrations; E.A. Bondarenko, E.D. Makshanova, M.Ju. Andrianova, N.V. Zueva & E.S. Urusova Implementation of virtual reality in BIM education; R. Bouska & R. Schneiderova Heralova Impact of flow rate on the water film thickness of water wall; K. Cakyova, F. Vranay & M. Kusnir Using wooden materials for heavy metals removal from waters; S. Demcak, M. Balintova, Z. Kovacova & M.
• Edition: 1st
• Publisher Details: Boca Raton : CRC Press
• Publication Date: 2019
• Extent: 1 online resource
• Subjects: 620; Engineering -- Congresses; Civil engineering -- Congresses
• Languages: English
• ISBNs: 9780429664434; 9780429667152; 9780429661716; 9780429021596
• Related ISBNs: 9780367075095
• Notes: Note: Description based on CIP data; resource not viewed.
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.