Vehicle and automotive engineering : proceedings of the JK2016, Miskolc, Hungary /: proceedings of the JK2016, Miskolc, Hungary. ([2017])
- Record Type:
- Book
- Title:
- Vehicle and automotive engineering : proceedings of the JK2016, Miskolc, Hungary /: proceedings of the JK2016, Miskolc, Hungary. ([2017])
- Main Title:
- Vehicle and automotive engineering : proceedings of the JK2016, Miskolc, Hungary
- Further Information:
- Note: Károly Jármai, Betti Bolló, editors.
- Editors:
- Jármai, Károly
Bolló, Betti - Contents:
- Preface; Acknowledgements; Contents; About the Editors; Design; 1 Investigation of Rolling Element Bearings Using Time Domain Features; Abstract; 1 Introduction; 2 Bearing Test Device; 3 Description of Investigation; 4 Analysis of Measurements; 5 Conclusion; Acknowledgements; References; 2 Truck Floor Design for Minimum Mass and Cost Using Different Materials; Abstract; 1 Introduction; 2 Load Cases; 2.1 Loads in the Horizontal Floor Position; 2.2 Loads on the Distorted Floor; 3 Geometric Characteristics of Cross Members; 4 Design Constraints. 4.1 Constraints on Fatigue Stress Range for the Horizontal Floor Position4.2 Constraint on Fatigue Stress Range for the Distorted Floor Position; 4.3 Constraints on Local Buckling of Profiles; 4.4 Fabrication Constraints: Size Limitations; 5 Optimization Characteristics and Results; 6 Mass Savings; 7 Cost Savings; 8 Conclusions; Acknowledgements; References; 3 Theoretical and Parametric Investigation of an Automobile Radiator; Abstract; 1 Introduction; 2 Calculation of the Automotive Radiator-Theorems; 2.1 Theorem of Fábry; 2.2 Theorem of Perry; 2.3 Cengel's Theorem. 3 Comparisons of the Theorem's Results4 Sensitivity Analysis, Optimization; 4.1 Preliminary Calculations; 4.2 Effect of the Radiator Width; 5 Summary; Acknowledgements; References; 4 Past and Present: Teaching and Research in Vehicle Engines at the University of Miskolc; Abstract; 1 Introduction; 2 In the Beginning; 3 Nowadays; Acknowledgements; References; 5 AlternatingPreface; Acknowledgements; Contents; About the Editors; Design; 1 Investigation of Rolling Element Bearings Using Time Domain Features; Abstract; 1 Introduction; 2 Bearing Test Device; 3 Description of Investigation; 4 Analysis of Measurements; 5 Conclusion; Acknowledgements; References; 2 Truck Floor Design for Minimum Mass and Cost Using Different Materials; Abstract; 1 Introduction; 2 Load Cases; 2.1 Loads in the Horizontal Floor Position; 2.2 Loads on the Distorted Floor; 3 Geometric Characteristics of Cross Members; 4 Design Constraints. 4.1 Constraints on Fatigue Stress Range for the Horizontal Floor Position4.2 Constraint on Fatigue Stress Range for the Distorted Floor Position; 4.3 Constraints on Local Buckling of Profiles; 4.4 Fabrication Constraints: Size Limitations; 5 Optimization Characteristics and Results; 6 Mass Savings; 7 Cost Savings; 8 Conclusions; Acknowledgements; References; 3 Theoretical and Parametric Investigation of an Automobile Radiator; Abstract; 1 Introduction; 2 Calculation of the Automotive Radiator-Theorems; 2.1 Theorem of Fábry; 2.2 Theorem of Perry; 2.3 Cengel's Theorem. 3 Comparisons of the Theorem's Results4 Sensitivity Analysis, Optimization; 4.1 Preliminary Calculations; 4.2 Effect of the Radiator Width; 5 Summary; Acknowledgements; References; 4 Past and Present: Teaching and Research in Vehicle Engines at the University of Miskolc; Abstract; 1 Introduction; 2 In the Beginning; 3 Nowadays; Acknowledgements; References; 5 Alternating Current Hydraulic Drive the Possibility of Applying in the Automotive Industry; Abstract; 1 Introduction; 2 The Synchronous Alternating-Current Hydraulic Drive (S-ACH); 3 Measurement; 4 Conclusion; References. 6 Comparative Destructive and Non-Destructive Residual Stress Measuring Methods for Steering Rack Bar Semi-ProductAbstract; 1 Introduction; 2 Experimental; 3 Results and Discussion; 3.1 Residual Stress States; 3.2 Stress Asymmetry; 4 Summary; Acknowledgements; References; 7 Dynamical Modelling of Vehicle's Maneuvering; Abstract; 1 Introduction; 2 Dynamics of Vehicle's Movement; 3 Equations of Dynamical Model; 4 Simulation Results; 4.1 Overtaking; 4.2 Turning in Left Direction; 5 Conclusions; Acknowledgements; References. 8 Developing a Rotary Internal Combustion Engine Characterised by High Speed OperationAbstract; 1 Introduction; 2 The Suggested New Internal Combustion Engine; 2.1 The Build-up of the Motor; 2.2 The Working of the Motor; 3 Positive and Negative Properties of the Engine; 3.1 Cost; 3.2 Efficiency; 3.3 Noise; 3.4 Properties Resulting in High Speed Operation; 3.5 Disadvantages; 4 Manufacturing Considerations; 4.1 Analyzing the Grinding Possibilities; 5 Summary; Acknowledgements; References; 9 Simulation Methods in the Vehicle Noise, Vibration and Harshness (NVH); Abstract; 1 Introduction. … (more)
- Publisher Details:
- Cham, Switzerland : Springer
- Publication Date:
- 2017
- Extent:
- 1 online resource, illustrations
- Subjects:
- 629.23
Engineering
Automobiles -- Design and construction -- Congresses
Motor vehicles -- Design and construction -- Congresses
Vehicles -- Design and construction -- Congresses
TECHNOLOGY & ENGINEERING -- Engineering (General)
Automobiles -- Design and construction
Motor vehicles -- Design and construction
Vehicles -- Design and construction
Technology & Engineering -- Material Science
Metals technology / metallurgy
Materials
Technology & Engineering -- Automotive
Automotive technology & trades
Electronic book
Electronic books
Conference papers and proceedings - Languages:
- English
- ISBNs:
- 9783319511894
3319511890 - Related ISBNs:
- 9783319511887
3319511882 - Notes:
- Note: Includes bibliographical references and index.
Note: Online resource; title from PDF title page (EBSCO, viewed April 04, 2017). - Access Rights:
- Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
- Access Usage:
- Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library HMNTS - ELD.DS.373511
- Ingest File:
- 02_353.xml