Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives : Energy, Aerospace, and Industrial Applications /: Energy, Aerospace, and Industrial Applications. (2018)

• Record Type: Book
• Further Information: Note: Eric Ott, [and 11 more], editors.
• Editors: Ott, Eric
• Other Names: International Symposium on Superalloy 718 & Derivatives, 9th
• Contents: Part 1. Superalloy 718 & Derivatives: Keynotes -- Age Hardenable Nickel-based Alloy Developments and Research for New High Temperature Power Cycles -- Superalloy 718; Evolution of the Alloy from High to Low Temperature Application -- Part 2. Alternative Processes -- Alloy 718: Laser Powder Bed Additive Manufacturing for Turbine Applications -- Progress in the Processing and Understanding of Alloy 718 Fabricated through Powder Bed Additive Manufacturing Processes -- Impact of Powder Variability on the Microstructure and Mechanical Behavior of Selective Laser Melted Alloy 718 -- The effect of location and post-treatment on the microstructure of EBM-built Alloy 718 -- Part 3. Applications -- ICME Based Additive Manufacturing of Alloy 230 Components -- Simulation of Co-Precipitation Kinetics in Superalloy 718 -- Part 4. Corrosion -- Performance of Wrought Superalloys in Extreme Environments -- Corrosion and Carburization Behavior of Ni-Cr-Mo-Nb Superalloys in a High Temperature Supercritical-CO2 Environment -- High Performance New Ni-base Alloy AF955 (UNS N09955) for Oil and Gas Industry -- Hydrogen Influence on Crack Propagation and Stress-Strain Evolution of Alloy 718 -- Isothermal Oxidation Behavior of EBM-additive Manufactured Alloy 718 -- Part 5. Melting and Casting -- A Computational Model of the Electroslag Remelting (ESR) Process and Its Application to an Industrial Process for a Large Diameter Superalloy Ingot -- Effect of Homogenization Temperature on Microstructures of IN718C Alloy with Different Solidification Cooling Rates -- Grain Refinement of IN718 Superalloy under the Modified Thermally-controlled Solidification Process -- Melt Parameters and Resulting Characteristics in Laboratory-Scale Electroslag Remelting -- Production of Nitride-free 718 by the VIM-VAR Processing Route -- Part 6. Microstructure and Behavior -- Characterization and Modeling of Deformation Mechanisms in Ni-base Superalloy 718 -- Characterization of Nano-Scale' Phase in HPT-Disk P/M Superalloys HGN300 by Small-Angle X-ray Scattering -- Development of an Automated Property Simulation Tool for Direct Aged Alloy 718 Engine Disk Forgings -- Microstructure Dependence of Dynamic Impact Behaviour of ATI 718Plus Superalloy -- 3D Stochastic Modelling of Microstructure Evolution during Solidification of Alloy 718 -- Analysis of microporosity-dependent fatigue crack behavior in Alloy 718 by using synchronic radiation X-ray CT and FEM -- Characterisation of the Initial Stages of Dynamic Recrystallisation in ATI 718Plus® -- Compositional Design and Mechanical Properties of INCONEL® Alloy 725 Variants -- Constrained Lattice Misfit Measurement in Bulk Inconel 718 Using High Resolution Neutron Diffraction -- Dependence of Creep Strength on Cooling Rate after Subsolvus Solution Treatment in Wrought Alloy 718 -- Depletion Induced Grain Growth in Alloy 751 after Long Term Aging and Its Effect on Fatigue -- Effect of Grain-Boundary Fe2Nb Phase on Stress-assisted Grain-Boundary Oxidation Behavior in Novel Austenitic Heat-resistant Steel of Fe-20Cr-35Ni-2.5Nb -- Effect of Heat Treatment on Microstructure and Mechanical Properties of VDM Alloy 780 Premium -- Effect of Homogenization on Creep of Additive Manufactured Inconel 718 -- Effects of HIP and Heat Treatment on Microstructure, Fracture Toughness and Fatigue Crack Growth Behavior of SLM-Based IN718 -- Effects of Phosphorus Addition on Creep Properties of Wrought Gamma-Prime Strengthened Ni-based Superalloy -- Enhanced Strength of Inconel 718 by High Rate Severe Plastic Deformation -- Evaluation of the Stress-Strain State in Alloy 718 after Hydrogen Charging -- Experimental TTT Diagram of HAYNES 282 Alloy -- Influence of Residual Stresses on Aging Precipitation Behavior of Alloy 718 -- Machine learning to optimize additive manufacturing parameters for laser powder bed fusion of Inconel 718 -- Mechanical Performance of Various INCONEL® 740/740H Alloy Compositions for Use in A-USC Castings -- Microstructural Characterization and Mechanical Properties of Rene 65 Precipitates -- Microstructure Development in Track-by-track Melting of EBM-manufactured Alloy 718 -- Modeling Tensile, Compressive, and Cyclic Response of Inconel 718 Using a Crystal Plasticity Model Incorporating the Effects of Precipitates -- Novel Fractgraphy of Ni-based Alloy by SEM/EBSD Method -- On the Effect of Alloying Additions to the Ni-Cr-Al-Nb Dual-Superlattice Gamma-Gamma Prime-Gamma Double Prime Superalloys -- Optimization of the Forging Process Window in Respect of AGG, IGG and Direct Age Effect in Alloy 718 Engine Disks -- Oxidation-assisted cracking at 650 °C in superalloy 718 manufactured by Laser Beam Melting: Effect of temperature and strain rate -- Precipitation Behavior and Mechanism of Sigma Phase in Alloy 925 -- Quantitative Texture Prediction of Epitaxial Columnar Grains in Inconel 718 Processed by Additive Manufacturing -- Research of Twin Induced LCF Cracking for 718 Alloy Using In-Situ Observation -- Shear Spinning of Nickelbased Superalloy 718 -- Strain Controlled Low Cycle Fatigue Behaviors of U720Li Disk Superalloy above 700 °C -- Stress Relaxation Behavior Comparison of Typical Nickel-base Superalloys for Fasteners -- Study of the Oxidation Assisted Intergranular Cracking Mechanism on a Ni-base Superalloy -- The Effect of Grain Size on the Dwell Fatigue Crack Growth Rate of Alloy 718Plus -- Thermal Processing Design of Cast INCONEL® Alloy 740H for Improved Mechanical Performance -- Part 6. Welding and Joining -- Factors Influencing Weldability of Nickel Superalloy Investment Castings -- Fracture Toughness and Fatigue Behaviour of Variably Precipitated Inconel 625/AISI 304L Welds -- Pitting Behavior of Thermally Aged Inconel 625 Weld Claddings Made Using SMAW and GMAW Process -- Review of weldability of precipitation hardening Ni- and Fe-Ni-based superalloys -- The Influence of Base Metal Microstructure on Weld Cracking in Manually GTA Repair Welded Cast ATI 718Plus® -- Varestraint Weldability Testing of ATI 718Plus® -- Influence of Eta Phase -- Part 7. Wrought Process -- The Case for Physical Experiments in a Digital Age -- The High-Temperature Bauschinger Effect in Alloy 718 -- Influence of Temperature and Strain Rate during Rolling of René 65 Bar -- Microstructure Controlling of U720-typed Superalloys to Improve a Hot and Cold Workability by Using Incoherent Gamma Prime -- Ring Rolling of IN718 for Critical Engine Applications -- The Abnormal Dynamic Recrystallization Behavior of Alloy 706 for Large Size Disc -- Part 8. Other Topics -- Application of Analytical Electron Microscopy and Tomographic Techniques for Metrology and 3D Imaging of Microstructural Elements in Allvac 718Plus -- Computed Tomography as an Alternative Method to Measure Crack Growth in Non-conventional Geometries -- Development of New Alloy 718 with Super Machinability -- Development of Ni-base Disk Alloy for Large-size Gas Turbines by Improving Macrosegregation Property of Alloy 718.
• Publisher Details: Cham, Switzerland : Springer
• Publication Date: 2018
• Extent: 1 online resource (xx, 1118 pages), illustrations
• Subjects: 669; Materials science; Heat resistant alloys -- Congresses; TECHNOLOGY & ENGINEERING -- Metallurgy; Heat resistant alloys; Technology & Engineering -- Material Science; Science -- System Theory; Testing of materials; Tribology (friction & lubrication); Social research & statistics; Materials; Surfaces (Physics); Chemistry, inorganic; Metals technology / metallurgy; Electronic books; Conference papers and proceedings
• Languages: English
• ISBNs: 9783319894805; 3319894803
• Related ISBNs: 9783319894799; 331989479X
• Notes: Note: Online resource; title from PDF title page (SpringerLink, viewed May 16, 2018).
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.