Advances in materials and pavement prediction : papers from the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P 2018), April 16-18, 2018, Doha, Qatar /: papers from the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P 2018), April 16-18, 2018, Doha, Qatar. (2018)

• Record Type: Book
• Further Information: Note: Edited by Eyad Masad, Amit Bhasin, Tom Scarpas, Ilaria Menapace, Anupam Kumar.
• Editors: Masad, Eyad; Bhasin, Amit; Scarpas, Tom; Menapace, Ilaria; Kumar, Anupam
• Other Names: International Conference on Advances in Materials and Pavement Performance Prediction
• Contents: Keynotes Building durable and sustainable pavements; I.L. Al-Qadi Multiscale modeling for performance prediction of asphaltic materials; R. Blab Empirical-fundamental: A meeting of the minds; D.N. Little Session 1: Modeling distress in flexible pavements Modeling the relationships between pavement distress and performance; Y. Qiao, S. Chen, M. Alinizzi & S. Labi Case study for overweight vehicle pavement damage associated costs; D. Batioja-Alvarez, S.-F. Kazemi, E.Y. Hajj, A.J.T. Hand & R.V. Siddharthan Calibration of a mechanistic-empirical fatigue model under different moisture conditions; E. Arias-Barrantes, J.P. Aguiar-Moya, L.G. Loría-Salazar & E. Camacho-Garita Low volume road damage—load and environmental factors; D.J. Alabaster, T.F.P. Henning & G.K. Arnold Effect of moisture infiltration on flexible pavement performance using the AASHTOWare Pavement-ME; S.W. Haider & M. Munum Masud Session 2: Integrating material and structural response The effect of asphalt layer stiffness modulus variation to top-down cracking; A. Nikolaides & E. Manthos Implementation of VECD model in the incremental-recursive CalME approach; M.A. Lanotte & M.E. Kutay Stress state of asphalt layers in hybrid pavements; J. Patzak Design and cost effectiveness of perpetual pavements; K. Loganathan, M.I. Souliman, Z. Chamoun & M.M. Isied Performance modeling of a highly modified asphalt pavement; R.Q. Kluttz, Y.R. Kim & R. Dongré Session 3: Structural health assessment Evaluation of airfield pavement responses from HWD deflections; H. Wang, M.Y. Li & R. Ji Damage progression identification in asphalt concrete pavements: A smart self-powered sensing approach; H. Hasni, K. Chatti, N. Lajnef, K. Aono & S. Chakrabartty Moving deflectometer devices to predict critical pavement responses; R.V. Siddharthan, E.Y. Hajj & M. Nasimifar Effect of fiber bragg grating sensors installation on pavement responses; L. Al Khateeb, T. Tang, S.M.J.G. Erkens, A. Scarpas, K. Anupamb & C. Kasbergen Study on integral processing of pavement vibration acceleration; G.N. Yan, Z.J. Ye, M. Guo & L.B. Wang Session 4: Measuring and modeling mixture performance – 1 Laboratory evaluation of foamed warm mix asphalt; A. Abbas, M. Nazzal, A. Ali, A. Roy & S. Dessouky Characterisation of air voids in W-FAM samples using X-Ray CT imaging; M. Sadeq, E.A. Masad, H. Al-Khalid & O. Sirin Characterizing the behavior of warm mix asphalt using a visco-elasto-plastic continuum damage model; H.A. Kassem & G.R. Chehab Effects of different loading conditions on fatigue properties of SMA; B. Ding, X. Zou & Z. Peng Laboratory evaluation of polymer-based mixes; S. Khoeini, S. Dessouky, A.T. Papagiannakis, L. Walubita & A. Abbas Session 5: Measuring and modeling mixture performance – 2 Frequency of fatigue tests and decay of modulus of asphalt concrete; S.P. Atul Narayan & R. Gupta Application potential of warm mix asphalt for airport pavements; N. Garg, H. Kazmee & L. Ricalde Asphalt mixture performance-related specifications; Y. Richard Kim Performance-based QC/QA procedure for HMA airport pavements: A case study; Y.S. Hamdar & G.R. Chehab Accurate prediction of laboratory permeability of hot mix asphalt using machine learning techniques; M.K. Nivedya & R.B. Mallick Session 6: Computational modeling to understand mixture production and behavior Experimental and numerical investigation on RAP mixtures at low temperature; A. Cannone Falchetto, K.H. Moon, D. Wang, C. Riccardi, B. Soo Yoo & M.P. Wistuba Simulation of asphalt mixtures made by different compaction methods; P. Liu, H. Xu, D. Wang, C. Wang, C. Schulze & M. Oeser Cumulative distress curve estimation from micromechanical asphalt model; I.O. Onifade, Y. Dinegdae & B. Birgisson Effect of aggregate packing on open AC: Micromechanical analysis; H. Zhang, K. Anupam, A. Scarpas & C. Kasbergen Numerical modeling of aggregate drying and heating in a rotary dryer; K. Zhang & B. Muhunthan Session 7: Measuring and modeling performance of asphalt binders Evaluation of degradation of polymer due to aging in asphalt binder using a novel and DSR-based extensional deformation test; R. Hossain, W.M. Omer & N.M. Wasiuddin Shear rate dependence on mixing and compaction temperatures; N. Saboo, P. Kumar, A. Gupta & R. Ranjeesh Development of PG for asphalt binders on Libyan desert road network; H. Awadat Salem & B. Matic Modeling of rubber swelling in bituminous binders; H. Wang, P. Apostolidis, X. Liu & A. Scarpas Effects of using re-refined engine oil bottoms as an asphalt binder modifier; W.S. Mogawer & A.J. Austerman Relation of modified bitumen microstructure to cracking indicators; R. Hajj, N. Sakib, A. Bhasin, A.S. Ramm & M.C. Downer Session 8: Binders and emulsions: Workability, adhesion and rheology Using surface free energy to study adhesion between asphalt and FRP; T. Wang, M. Guo, L.B. Wang & D.W. Wang Influence of dosage of warm mix additives on the rheological behavior of asphalt binders in the mixing and compaction temperature regime; K. Lakshmi Roja, P.S. Divya, N. Dhanya & J. Murali Krishnan Nano-Fiber modified asphalt emulsion residues at high temperatures; F. Xiao, R. Li, H. Huang & Z. Chen Research on the adhesion property of asphalt-ceramsite system; M. Zhang, Z. Qian, Y. Liu, D. Xia, Y. Zhou & R. Jing Performance of emulsion residue obtained from oven evaporation and MAB; Abhishek & D. Singh Session 9: Recycling in asphalt mixes A simple approach for modification of RAP bitumen; S. Purohit & M. Panda Investigation of cracking resistance of recycled superpave mixtures; Y. Gao, S. Islam & M. Hossain Optimal waste cooking oil dosage in blends containing aged binder; M. Orešković, G. Mladenović, S. Bressi & M. Losa Case study on balancing mixtures with high recycled materials contents; E. Arámbula-Mercado, A. Epps Martin & F. Kaseer Recycling efficiency evaluation of asphalt plant; Y. Ding, B. Huang & X. Shu Session 10: Modeling and measurement of noise and tire-pavement interaction Evaluation of traffic noise in the State of Qatar; Md. Ohiduzzaman, O. Sirin & E. Kassem Determining the effect of damping layers in flexible pavements on traffic induced vibrations; J. Huang, M. Losa & P. Leandri Holistic simulation of tire-pavement-system: Mechanics and uncertainty; M. Kaliske, I. Wollny, F. Hartung & M.
• Edition: 1st
• Publisher Details: Boca Raton : CRC Press
• Publication Date: 2018
• Extent: 1 online resource
• Subjects: 625.8; Pavements -- Performance -- Congresses; Pavements -- Design and construction -- Congresses; Pavements -- Cracking -- Mathematical models -- Congresses; Road materials -- Testing -- Congresses
• Languages: English
• ISBNs: 9780429855795; 9780429855801; 9780429855788; 9780429457791
• Related ISBNs: 9781138313095
• Notes: Note: Description based on CIP data; resource not viewed.
• Access Rights: Legal Deposit; Only available on premises controlled by the deposit library and to one user at any one time; The Legal Deposit Libraries (Non-Print Works) Regulations (UK).
• Access Usage: Restricted: Printing from this resource is governed by The Legal Deposit Libraries (Non-Print Works) Regulations (UK) and UK copyright law currently in force.