4171. Study of the damage and failure of the shear ram of the blowout preventer in the shearing process. (December 2015) Authors: Han, Chuanjun; Yang, Xue; Zhang, Jie; Huang, Xianping Journal: Engineering failure analysis Issue: Volume 58:Part 1(2015:Dec.) Page Start: 83 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4172. Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes. (January 2017) Authors: Pandey, Chandan; Saini, Nitin; Mahapatra, Manas Mohan; Kumar, Pradeep Journal: Engineering failure analysis Issue: Volume 71(2017) Page Start: 131 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4173. Study of the glass fibres and internal lubricants influence in a polyamide 66 matrix on the wear evolution of polyacetal and polyamide 66 based gears in a meshing process. (April 2022) Authors: Hriberšek, M.; Kulovec, Simon Journal: Engineering failure analysis Issue: Volume 134(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4174. Study of the influence of surface treatment on the wear development under quasi-static loading of the levers of a newly designed thrust bearing. (June 2021) Authors: Monkova, Katarina; Urban, Marek; Monka, Peter Pavol; Kozak, Drazan Journal: Engineering failure analysis Issue: Volume 124(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4175. Study of the lightning damage produced in a full-locked wire rope of an aerial cableway. (September 2019) Authors: Fontanari, Vigilio; Menapace, Cinzia; Pedrotti, Ettore Journal: Engineering failure analysis Issue: Volume 103(2019) Page Start: 530 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4176. Study of the prevalence of critical and conflict-prone points in facades. (May 2017) Authors: Carretero-Ayuso, Manuel J.; Moreno-Cansado, Alberto; de Brito, Jorge Journal: Engineering failure analysis Issue: Volume 75(2017) Page Start: 15 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4177. Study of the progressive collapse mechanism of excavations retained by cantilever contiguous piles. (January 2017) Authors: Cheng, X.S.; Zheng, G.; Diao, Y.; Huang, T.M.; Deng, C.H.; Lei, Y.W.; Zhou, H.Z. Journal: Engineering failure analysis Issue: Volume 71(2017) Page Start: 72 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4178. Study of the remanufacturing critical threshold and remanufacturability evaluation for FV520B-I blade based on fatigue life and FEA. (May 2020) Authors: Jinlong, Wang; Jing, Yu; Yuxing, Yang; Fengming, Du; Jingsi, Wang Journal: Engineering failure analysis Issue: Volume 112(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4179. Study of the Sheyuegou dam breach – Experience with the post-failure investigation and back analysis. (July 2021) Authors: Yu, Shu; Zhang, Qiang; Chen, Zuyu; Hao, Jianwei; Wang, Lin; Li, Peng; Zhong, Qiming Journal: Engineering failure analysis Issue: Volume 125(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4180. Study of the variation of contact state near the contact boundary in a dovetail attachment under different loads. (November 2019) Authors: Wei, Da-Sheng; Ma, Meng-Di; Zhang, Hui; Hu, Chen; Wang, Yan-Rong Journal: Engineering failure analysis Issue: Volume 105(2019) Page Start: 518 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗