1. Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel. (15th April 2014) Authors: Shaikh, Vasim; Boubekri, Nourredine; Scharf, Thomas W. Other Names: Dessein Gilles Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process. (10th November 2014) Authors: Onwubolu, Godfrey C.; Rayegani, Farzad Other Names: Filice Luigino Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Comparison of Microstructure and Mechanical Properties of A356/SiC Metal Matrix Composites Produced by Two Different Melting Routes. (20th October 2014) Authors: Dwivedi, Shashi Prakash; Sharma, Satpal; Mishra, Raghvendra Kumar Other Names: Chen Shia-Chung Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Cutting Forces in Milling of Carbon Fibre Reinforced Plastics. (13th November 2014) Authors: Sorrentino, Luca; Turchetta, Sandro Other Names: Kurfess Thomas R. Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Enhancing Multistage Deep-Drawing and Ironing Manufacturing Processes of Axisymmetric Components: Analysis and Experimentation. (29th May 2014) Authors: Ramírez, F. Javier; Domingo, Rosario; Packianather, Michael S.; Sebastian, Miguel A. Other Names: Hascoet Jean-Yves Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Experimental Investigation and Multiobjective Optimization of Turning Duplex Stainless Steels. (2nd December 2014) Authors: Koyee, Rastee D.; Heisel, Uwe; Schmauder, Siegfried; Eisseler, Rocco Other Names: Onwubolu Godfrey C. Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Failure Prediction in Bulk Metal Forming Process. (10th November 2014) Authors: Topa, Ameen; Shah, Qasim H. Other Names: Yu Hailiang Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Finite Element Analysis of PMMA Stretch Blow Molding. (27th August 2014) Authors: Bougharriou, Afef; Jeridi, Mohieddine; Hdiji, Mohamed; Boughrira, Anoir; Saï, Kacem Other Names: Yu Hailiang Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Finite Element Analysis of Residual Stress in Ti-6Al-4V Alloy Plate Induced by Deep Rolling Process under Complex Roller Path. (23rd December 2014) Authors: Liou, J. J.; El-Wardany, T. I. Other Names: Lockamy Archie Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology. (22nd September 2014) Authors: Sultan, Teepu; Kumar, Anish; Gupta, Rahul Dev Other Names: Dessein Gilles Academic Editor. Journal: International journal of manufacturing engineering Issue: Volume 2014(2014) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗