1. An experimental study for determination of an application method and TiO2 powder to ensure the thinnest matte coating layer for 3D optical scanning. (March 2019) Authors: Hruboš, David; Koutecký, Tomáš; Paloušek, David Journal: Measurement Issue: Volume 136(2019) Page Start: 42 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples. (April 2019) Authors: Zikmund, Tomáš; Šalplachta, Jakub; Zatočilová, Aneta; Břínek, Adam; Pantělejev, Libor; Štěpánek, Roman; Koutný, Daniel; Paloušek, David; Kaiser, Jozef Journal: NDT & E international Issue: Volume 103(2019) Page Start: 111 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Contour laser strategy and its benefits for lattice structure manufacturing by selective laser melting technology. (February 2022) Authors: Vrána, Radek; Jaroš, Jan; Koutný, Daniel; Nosek, Jakub; Zikmund, Tomáš; Kaiser, Jozef; Paloušek, David Journal: Journal of manufacturing processes Issue: Volume 74(2022) Page Start: 640 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. (September 2021) Authors: Suchý, Jan; Klakurková, Lenka; Man, Ondřej; Remešová, Michaela; Horynová, Miroslava; Paloušek, David; Koutný, Daniel; Krištofová, Patrícia; Vojtěch, Dalibor; Čelko, Ladislav Journal: Journal of manufacturing processes Issue: Volume 69(2021) Page Start: 556 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Effect of high-temperature preheating on pure copper thick-walled samples processed by laser powder bed fusion. (January 2022) Authors: Malý, Martin; Koutný, Daniel; Pantělejev, Libor; Pambaguian, Laurent; Paloušek, David Journal: Journal of manufacturing processes Issue: Volume 73(2022) Page Start: 924 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Enhancing the accuracy of forging measurement using silhouettes in images. (15th May 2022) Authors: Hurník, Jakub; Zatočilová, Aneta; Koutný, Daniel; Paloušek, David Journal: Measurement Issue: Volume 194(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Image-based measurement of the dimensions and of the axis straightness of hot forgings. (December 2016) Authors: Zatočilová, Aneta; Paloušek, David; Brandejs, Jan Journal: Measurement Issue: Volume 94(2016) Page Start: 254 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Tribological behaviour of 3D printed materials for small joint implants: A pilot study. (August 2022) Authors: Ranuša, Matúš; Čípek, Pavel; Vrbka, Martin; Paloušek, David; Křupka, Ivan; Hartl, Martin Journal: Journal of the mechanical behavior of biomedical materials Issue: Volume 132(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner. Issue 3 (4th May 2017) Authors: Ranuša, Matúš; Gallo, Jiří; Vrbka, Martin; Hobza, Martin; Paloušek, David; Křupka, Ivan; Hartl, Martin Journal: Tribology transactions Issue: Volume 60:Issue 3(2017) Page Start: 437 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗