1. Bilateral comparisons of measurement capabilities for the calibration of low nominal capacity torque measuring devices between NMIJ and PTB in the range from 0.1 N m to 10 N m using different procedures. (May 2015) Authors: Nishino, Atsuhiro; Ogushi, Koji; Ueda, Kazunaga; Röske, Dirk; Mauersberger, Dietmar Journal: Measurement Issue: Volume 68(2015:May) Page Start: 32 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Calibration of a torque measuring device using an electromagnetic force torque standard machine. (December 2019) Authors: Nishino, Atsuhiro; Fujii, Kenichi Journal: Measurement Issue: Volume 147(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Calibration of reference torque wrenches using a 10 N m deadweight torque standard machine. (February 2015) Authors: Nishino, Atsuhiro; Ogushi, Koji; Ueda, Kazunaga Journal: Measurement Issue: Volume 61(2015:Feb.) Page Start: 1 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Design of a new dynamic torque generation machine based on the principle of Kibble balance. (December 2021) Authors: Hamaji, Misaki; Nishino, Atsuhiro; Ogushi, Koji Journal: Measurement Issue: Volume 18(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Design of a new torque standard machine based on a torque generation method using electromagnetic force. (20th December 2016) Authors: Nishino, Atsuhiro; Ueda, Kazunaga; Fujii, Kenichi Journal: Measurement science & technology Issue: Volume 28:Number 2(2017:Feb.) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Design of a Newton's constant G measurement system using a torque generation machine based on the principle of Kibble balance. (December 2021) Authors: Nishino, Atsuhiro Journal: Measurement Issue: Volume 18(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Development of 2 N dead-weight type force standard machine. (15th March 2020) Authors: Zhu, Junfang; Hayashi, Toshiyuki; Nishino, Atsuhiro; Ogushi, Koji Journal: Measurement Issue: Volume 154(2020) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Development of a nano-torque generating machine using electromagnetic force based on the principle of the Kibble balance. (15th May 2022) Authors: Nishino, Atsuhiro; Kinoshita, Moto Journal: Measurement Issue: Volume 194(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Development of a novel dynamic torque generation machine based on the principle of a Kibble balance. (1st November 2022) Authors: Hamaji, Misaki; Nishino, Atsuhiro; Ogushi, Koji Journal: Measurement science & technology Issue: Volume 33:Number 11(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. Development of a novel microforce-generating machine based on a force generation method using electromagnetic force. (2nd November 2021) Authors: Zhu, Junfang; Hayashi, Toshiyuki; Nishino, Atsuhiro; Ogushi, Koji Journal: Measurement science & technology Issue: Volume 33:Number 1(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗