1. Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments. (September 2021) Authors: Jakob, S.; Hohenwarter, A.; Lorich, A.; Knabl, W.; Pippan, R.; Clemens, H.; Maier-Kiener, V. Journal: Materials & design Issue: Volume 207(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests. (June 2023) Authors: Jakob, S.; Hohenwarter, A.; Lorich, A.; Knabl, W.; Pippan, R.; Clemens, H.; Maier-Kiener, V. Journal: International journal of refractory metals & hard materials Issue: Volume 113(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Evolution of nano-pores during annealing of technically pure molybdenum sheet produced from different sintered formats. (January 2023) Authors: Jakob, S.; Lorich, A.; Knabl, W.; Stark, A.; Staron, P.; Clemens, H.; Spoerk-Erdely, P.; Maier-Kiener, V. Journal: International journal of refractory metals & hard materials Issue: Volume 110(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Grain boundary segregation engineering in as-sintered molybdenum for improved ductility. (November 2018) Authors: Leitner (née Babinsky), K.; Lutz, D.; Knabl, W.; Eidenberger-Schober, M.; Huber, K.; Lorich, A.; Clemens, H.; Maier-Kiener, V. Journal: Scripta materialia Issue: Number 156(2018) Page Start: 60 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum. (15th November 2019) Authors: Jakob, S.; Leitner, A.; Lorich, A.; Eidenberger-Schober, M.; Knabl, W.; Pippan, R.; Clemens, H.; Maier-Kiener, V. Journal: Materials & design Issue: Volume 182(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. On grain boundary segregation in molybdenum materials. (5th December 2017) Authors: Leitner (née Babinsky), K.; Felfer, P.J.; Holec, D.; Cairney, J.; Knabl, W.; Lorich, A.; Clemens, H.; Primig, S. Journal: Materials & design Issue: Volume 135(2017) Page Start: 204 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum. (January 2015) Authors: Primig, S.; Clemens, H.; Knabl, W.; Lorich, A.; Stickler, R. Journal: International journal of refractory metals & hard materials Issue: Volume 48(2015:Jan.) Page Start: 179 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗