1. A directional modification of the Levkovitch–Svendsen cross-hardening model based on the stress deviator. (July 2015) Authors: Soyarslan, C.; Klusemann, B.; Bargmann, S. Journal: Mechanics of materials Issue: Volume 86(2015:Jul.) Page Start: 21 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Acceleration of material‐dominated calculations via phase‐space simplicial subdivision and interpolation. (17th March 2015) Authors: Klusemann, B.; Ortiz, M. Journal: International journal for numerical methods in engineering Issue: Volume 103:Number 4(2015) Page Start: 256 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Application of stress intensity factor superposition in residual stress fields considering crack closure. (15th February 2021) Authors: Keller, S.; Klusemann, B. Journal: Engineering fracture mechanics Issue: Volume 243(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach. (November 2019) Authors: Keller, S.; Horstmann, M.; Kashaev, N.; Klusemann, B. Journal: Engineering fracture mechanics Issue: Volume 221(2019) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Experimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peening. (July 2019) Authors: Keller, S.; Horstmann, M.; Kashaev, N.; Klusemann, B. Journal: International journal of fatigue Issue: Volume 124(2019) Page Start: 265 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Fiber laser welding of dissimilar titanium (Ti-6Al-4V/cp-Ti) T-joints and their laser forming process for aircraft application. (1st November 2017) Authors: Froend, M.; Fomin, F.; Riekehr, S.; Alvarez, P.; Zubiri, F.; Bauer, S.; Klusemann, B.; Kashaev, N. Journal: Optics & laser technology Issue: Volume 96(2017) Page Start: 123 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding. Issue 6 (12th June 2020) Authors: Yamin, M.F.; Awang, M.; Suhuddin, U.F.H.; Sallih, N.; Klusemann, B.; dos Santos, J.F. Journal: Materialwissenschaft und Werkstofftechnik Issue: Volume 51:Issue 6(2020:Jun.) Page Start: 830 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. Process development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laser. (August 2018) Authors: Froend, M.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. Journal: Journal of manufacturing processes Issue: Volume 34:Part A(2018) Page Start: 721 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. The effect of yield surface curvature change by cross hardening on forming limit diagrams of sheets. (October 2016) Authors: Soyarslan, C.; Klusemann, B.; Bargmann, S. Journal: International journal of mechanical sciences Issue: Volume 117(2016) Page Start: 53 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
10. The effect of yield surface curvature change by cross hardening on forming limit diagrams of sheets. (October 2016) Authors: Soyarslan, C.; Klusemann, B.; Bargmann, S. Journal: International journal of mechanical sciences Issue: Volume 117(2016) Page Start: 53 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗