1. A new Zr-rich intermetallic phase in an Al-14Si-3Cu-4.5Ni casting alloy with trace additions of Zr. (February 2020) Authors: Jo, Min-Su; Cho, Young-Hee; Lee, Jung-Moo; Kim, Su-Hyeon; Kang, Jun-Yun; Jung, Jae-Gil; Kim, Soo-Bae; Jang, Jae-il Journal: Intermetallics Issue: Volume 117(2020:Feb.) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Designing the composition and processing route of aluminum alloys using CALPHAD: Case studies. (March 2019) Authors: Jung, Jae-Gil; Cho, Young-Hee; Lee, Jung-Moo; Kim, Hyoung-Wook; Euh, Kwangjun Journal: Calphad Issue: Volume 64(2019) Page Start: 236 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Influence of undissolved second-phase particles on dynamic recrystallization behavior of Mg–7Sn–1Al–1Zn alloy during low- and high-temperature extrusions. (30th April 2021) Authors: Kim, Hyun Ji; Jin, Sang-Cheol; Jung, Jae-Gil; Park, Sung Hyuk Journal: Journal of materials science & technology Issue: Volume 71(2021) Page Start: 87 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Mechanism of ultrasound-induced microstructure modification in Al–Zr alloys. (15th October 2020) Authors: Jung, Jae-Gil; Cho, Young-Hee; Kim, Sung-Dae; Kim, Soo-Bae; Lee, Sang-Hwa; Song, Kyung; Euh, Kwangjun; Lee, Jung-Moo Journal: Acta materialia Issue: Volume 199(2020) Page Start: 73 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy. (1st February 2018) Authors: Jung, Jae-Gil; Ahn, Tae-Young; Cho, Young-Hee; Kim, Su-Hyeon; Lee, Jung-Moo Journal: Acta materialia Issue: Volume 144(2018) Page Start: 31 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. The effect of Si on hydrogen embrittlement of Fe-18Mn-0.6C-xSi twinning-induced plasticity steels. (15th January 2016) Authors: Lee, Sang-Min; Park, Il-Jeong; Jung, Jae-Gil; Lee, Young-Kook Journal: Acta materialia Issue: Volume 103(2016) Page Start: 264 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. The effect of Si on hydrogen embrittlement of Fe-18Mn-0.6C-xSi twinning-induced plasticity steels. (15th January 2016) Authors: Lee, Sang-Min; Park, Il-Jeong; Jung, Jae-Gil; Lee, Young-Kook Journal: Acta materialia Issue: Volume 103(2016) Page Start: 264 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
8. The effect of ultrasonic melt treatment on solid solution treatment temperature and/or time for an Al-7Si-2Cu-1Mg alloy. (3rd May 2020) Authors: Kim, Soo-Bae; Cho, Young-Hee; Jo, Min-Su; Jung, Jae-Gil; Lee, Young-Kook; Lee, Jung-Moo Journal: International journal of cast metals research Issue: Volume 33:Number 2/3(2020) Page Start: 61 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
9. Ultrafine-grained Al-Mg-Zr alloy processed by shear-assisted extrusion with high thermal stability. (September 2020) Authors: Croteau, Joseph R.; Jung, Jae-Gil; Whalen, Scott A.; Darsell, Jens; Mello, Austin; Holstine, Dallas; Lay, Kylee; Hansen, Michael; Dunand, David C.; Vo, Nhon Q. Journal: Scripta materialia Issue: Number 186(2020) Page Start: 326 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗