1. Effect of build direction dependent grain structure on fatigue crack growth of biomedical Co–29Cr–6Mo alloy processed by laser powder bed fusion. (November 2021) Authors: Anuar, A.; Guraya, T.; Chen, Z.W.; Ramezani, M.; San Sebastián-Ormazabal, M. Journal: Journal of the mechanical behavior of biomedical materials Issue: Volume 123(2021) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
2. Evaluation of portable XRF instrumentation for assessing potential environmental exposure to toxic elements. Issue 1 (2nd January 2016) Authors: McIntosh, Kathryn G.; Guimarães, Diana; Cusack, Matthew J.; Vershinin, Alexei; Chen, Z.W.; Yang, Karl; Parsons, Patrick J. Journal: International journal of environmental analytical chemistry Issue: Volume 96:Issue 1(2016) Page Start: 15 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
3. Fatigue strength of friction stir lap welded AA2024 to Ti6Al4V dissimilar joints. (August 2022) Authors: Ales, S.; Yazdanian, S.; Pasang, T.; Chen, Z.W. Journal: Engineering failure analysis Issue: Volume 138(2022) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
4. Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion. Issue 1 (31st December 2023) Authors: Yu, S.J.; Wang, P.; Li, H.C.; Setchi, R.; Wu, M.W.; Liu, Z.Y.; Chen, Z.W.; Waqar, S.; Zhang, L.C. Journal: Virtual and physical prototyping Issue: Volume 18:Issue 1(2023) Page Start: Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
5. Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting. (1st January 2020) Authors: Wang, P.; Lao, C.S.; Chen, Z.W.; Liu, Y.K.; Wang, H.; Wendrock, H.; Eckert, J.; Scudino, S. Journal: Journal of materials science & technology Issue: Volume 36(2020) Page Start: 18 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
6. Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks. (15th December 2016) Authors: Darvish, K.; Chen, Z.W.; Pasang, T. Journal: Materials & design Issue: Volume 112(2016) Page Start: 357 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗
7. Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks. (15th December 2016) Authors: Darvish, K.; Chen, Z.W.; Pasang, T. Journal: Materials & design Issue: Volume 112(2016) Page Start: 357 Record Type: Journal Article View Content: Available online (eLD content is only available in our Reading Rooms) ↗